Update on travel dilemma: $2,500 vs $500 ✈️🌏
Quick update on our travel dilemma:
* still waiting for our Australian travel visa to get sorted
* if it gets sorted in timely manner, we will still go
* to fly home from Vancouver will cost $2,500
* to fly home from Edmonton will cost $500
* to drive from Vancouver to Edmonton will take 12 hrs
Instead of our venture across the country being a waste we want to make the best out of an unfortunate situation so we’ve made the decision to rent a car and drive to Edmonton.
We will be filming the drive thru the Rockies 🏔️
We’ve also been searching marketplace for cars for sale in the area so if we find anything worth checking out we’ll also film and share that with you guys.
Stay tuned 🌏
#badchad
Видео Update on travel dilemma: $2,500 vs $500 ✈️🌏 канала Bad Chad
* still waiting for our Australian travel visa to get sorted
* if it gets sorted in timely manner, we will still go
* to fly home from Vancouver will cost $2,500
* to fly home from Edmonton will cost $500
* to drive from Vancouver to Edmonton will take 12 hrs
Instead of our venture across the country being a waste we want to make the best out of an unfortunate situation so we’ve made the decision to rent a car and drive to Edmonton.
We will be filming the drive thru the Rockies 🏔️
We’ve also been searching marketplace for cars for sale in the area so if we find anything worth checking out we’ll also film and share that with you guys.
Stay tuned 🌏
#badchad
Видео Update on travel dilemma: $2,500 vs $500 ✈️🌏 канала Bad Chad
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Fabricating a box from scratch for custom pickup truck ➜ stake pocket fab](https://i.ytimg.com/vi/HQyxJgv868s/default.jpg)
![Creating the perfect door gap using this simple trick ✅ 1935 Plymouth](https://i.ytimg.com/vi/s8AjJgoheNE/default.jpg)
![Bad Chad x Motorsports Hall of Fame of America | Daytona International Speedway](https://i.ytimg.com/vi/Jk-QFgvYjKY/default.jpg)
![Pre-1968 vintage hotrod drag racing with serious horsepower engines 🇦🇺🏁](https://i.ytimg.com/vi/r6UrmIkui_c/default.jpg)
![The next hurdle is to add structural integrity to the roof](https://i.ytimg.com/vi/yPJk-xxLbDQ/default.jpg)
![We have to widen the rear fenders to fit the box sides](https://i.ytimg.com/vi/NxivpQiJwj8/default.jpg)
![This was insane 🤯 Race track lap with Paul Morris + private tour!](https://i.ytimg.com/vi/AFwNUSM_b4s/default.jpg)
![Jolene is butt welding the widened rear fender on the 1935 Plymouth](https://i.ytimg.com/vi/8KUOsN9Tb10/default.jpg)
![Bad Chad's 1st day in Australia 🇦🇺](https://i.ytimg.com/vi/uLYRYD93_2E/default.jpg)
![Final video of the roof chop: fitting the door tops](https://i.ytimg.com/vi/FGsM9YkKUN4/default.jpg)
![Using 3" exhaust pipe to fabricate running boards on 1935 Plymouth truck](https://i.ytimg.com/vi/X4RhgEoG9ek/default.jpg)
![I can't believe a fan sent this to us 🤯 #unboxing fan mail](https://i.ytimg.com/vi/I-StMLhPNcU/default.jpg)
![The fabrication continues on the SEDAN to TRUCK conversion 🛠](https://i.ytimg.com/vi/MEcKY3JglMY/default.jpg)
![Sheathing in the back of the cab with 18 gauge sheet metal](https://i.ytimg.com/vi/1KAfsUHqYao/default.jpg)
![It just keeps getting better and better 👏🏼 (Notnek's Garage)](https://i.ytimg.com/vi/f9G2H-xZILk/default.jpg)
![The $1,000,000 question… are we ready to paint the body?](https://i.ytimg.com/vi/bNH4tG0aeRc/default.jpg)
![The hardest part of making the cab... body line fabrication from scratch](https://i.ytimg.com/vi/z8Nfm0czQrU/default.jpg)
![We had a special visit today... An original 1930 Hudson Essex Super Six](https://i.ytimg.com/vi/bEF6gvdUVzE/default.jpg)
![Bad Chad vs Jolene: 1/8 mile drag race 🏆🇦🇺](https://i.ytimg.com/vi/lfetrd7Es3E/default.jpg)
![Running board fabrication from scratch for the 1935 Plymouth custom truck](https://i.ytimg.com/vi/wcFlb_RAJYw/default.jpg)
![Sheathing in the front fenders – here comes the visual 😍](https://i.ytimg.com/vi/0SsaEVTEU6I/default.jpg)