AMMAURO #3 - ESP8266 IoT 2017, native C SDK Getting Started for Windows, Mac & Linux

Getting Started with IoT! Native C firmware development setup & tutorial for the ESP8266 on Mac & Windows, using the official ESP SDK. ESP-01 and NodeMCU (ESP-12E) demonstrations included. NOTE the error near 20:15 and check full description for more info.

Wow, the 3rd video in the AMMAURO label (http://ammauro.com) looks at how to use your Mac or Windows environment, with a Linux Virtual Machine (see my previous video: https://youtu.be/kYEzEFH5LiM), to set up a full ESP8266 development toolchain from scratch, easily. See an actual firmware get built from C source code and get uploaded to the ESP-01 (via programming jig) and ESP-12E (via NodeMCU board).

NOTE the error near 20:15 in the video, in that typically the TX/RX pair of the ESP-01 module should *cross over* and connect to the RX/TX pair of your USB-to-serial adaptor... i.e. TX connects to RX, and not TX to TX.

esp-open-sdk GitHub page: https://github.com/pfalcon/esp-open-sdk

Table of Contents:

00:28 - Introduction
01:50 - Part 1: Overview of ESP8266-based parts
04:27 - Part 2: NodeMCU USB pass-through to Linux via VirtualBox
07:14 - Part 3: Serial communication with the ESP8266
09:37 - Part 4: Installing esp-open-sdk
12:45 - Part 5: Building example firmware
14:21 - Part 6: Using esptool.py to control the ESP8266
18:01 - Part 7: Uploading firmware to the ESP8266 with esptool.py
19:37 - Part 8: ESP-01 programming jig design and operation
22:31 - Part 9: ESP-01 specific programming steps and instructions
26:03 - Conclusion

NOTE: The soundtrack for this video includes:
Chance, Luck, Errors in Nature, Fate, Destruction As a Finale by Chris Zabriskie is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/)
Source: http://chriszabriskie.com/reappear/
Artist: http://chriszabriskie.com/

Видео AMMAURO #3 - ESP8266 IoT 2017, native C SDK Getting Started for Windows, Mac & Linux канала Anton Maurovic