DIY Traction Bars Cal-Clone update
Roughly $125.00 invested making knock off DIY Caltrac bars.
2x RH 3/4 3/4 Heim joint w/ jam nut
2x LH 3/4 3/4 Heim joint w/ jam nut
1” OD 3/4” ID. Big HP look for .120” wall thickness. My bars are .097” wall.
Grade 8 3/4 bolts and washers
3/16” steel plate to cut the brackets from.
Видео DIY Traction Bars Cal-Clone update канала HeadFlowInc
2x RH 3/4 3/4 Heim joint w/ jam nut
2x LH 3/4 3/4 Heim joint w/ jam nut
1” OD 3/4” ID. Big HP look for .120” wall thickness. My bars are .097” wall.
Grade 8 3/4 bolts and washers
3/16” steel plate to cut the brackets from.
Видео DIY Traction Bars Cal-Clone update канала HeadFlowInc
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DIY S10 TRACTION.... FOR CHEAP!!
Installing CalTracs & Do They Work? Are Traction bars Worth It. How To Eliminate Wheel Hop
Leaf Springs for Drag Racing
Installing Speed Engineering Traction Bars on a Supercharged Silverado
Sinister project update: S10 rear traction mod.
VAS traction bars/how to install
How to Build Traction Bars
Trey’s 73 C10 Turbo LS Swap Get’s Custom DIY Caltracs Style Traction Bars
Are Traction Bars WORTH IT?!
Building Custom Traction Bars For My Truck TRAC BARS
The LS S10 IS ALIVE & Sounds INSANE! - LS Swapping the S10 Pt. 8
TFS: Custom Control Arm Part 1
CALTRACS TRACTION BAR INSTALL ON NOVA + SUBFRAME CONNECTOR INSTALL
Traction Bars - Do They Work?
Ford 8.8 With Caltracs Install In The V8 S10 Part 2
Heavily modified turbo Crx build lambo killer Part 17 (Diy Traction bar)
Replacing a Bumpside Ford F100 heater core in a matter of minutes! 1967 through 1972
Mullet El Camino Build Episode 7 Rear End Assembly, Shifter, and YouTube 100k Subs Plaque!!!!!
How To Install Ring And Pinion Gears