INTAKE & TURBO INLET INSTALL!
Today We Install a James Barone Racing Full Intake in our Mazdaspeed 3! Join our Community of DIY'ers: http://www.youtube.com/user/everythingdiy?sub_confirmation=1 Follow us on Facebook for More DIY Goodness: https://www.facebook.com/e.doityourself
Follow us on Twitter! https://twitter.com/everything_diy
Check out our Pictures on Instagram! http://instagram.com/e_diy
Check out our 5,000 subscriber giveaway video for this intake! https://www.youtube.com/watch?v=MMz-nrCfg48
The stock airbox on Mazdaspeed 3's and 6's have been known to be quite restrictive, so upgrading will definitely add horsepower, torque, better throttle response and quicker turbo spool. These features will be greatly enhanced with a tune. This install video should help those that are either just trying to install an intake or those who are looking to install a full intake and turbo inlet pipe as well.
**PLEASE READ - Adding an intake to a Mazdaspeed 3 or 6 can cause a stock high pressure fuel pump to lose pressure causing your engine to run lean. It's recommended you upgrade your high pressure fuel pump internals before this install.**
Parts:
- James Barone Racing Power Path Stage 2 Intake
* Intake Hose
* Billet Aluminum MAF Housing
* Dry Flow Filter
* Turbo Inlet Pipe
Tools we used:
- Flat Head Screwdriver
- 3/8 Ratchet and Various Sockets (mostly 10 mm)
- 12 inch 3/8 Extension
- Needle Nose Pliers
- Vise-grip (not required but helpful)
- Wrenches of Various Sizes
The DIY Rep in this Video is Ally!
To send letters, products for review/use, other correspondence - please use this address:
everythingdiy
P.O. Box 186
Pasadena, CA 91102
FTC Disclaimer:
All products mentioned were purchased by us. None of the companies mentioned are paying us for this video. All opinions are our own.
Other Disclaimers- Everything you do is at your own risk. Everything DIY or its affiliates are not responsible for any personal injury or property damages incurred.
***SAFETY FIRST EVERY TIME***
Видео INTAKE & TURBO INLET INSTALL! канала everythingdiy
Follow us on Twitter! https://twitter.com/everything_diy
Check out our Pictures on Instagram! http://instagram.com/e_diy
Check out our 5,000 subscriber giveaway video for this intake! https://www.youtube.com/watch?v=MMz-nrCfg48
The stock airbox on Mazdaspeed 3's and 6's have been known to be quite restrictive, so upgrading will definitely add horsepower, torque, better throttle response and quicker turbo spool. These features will be greatly enhanced with a tune. This install video should help those that are either just trying to install an intake or those who are looking to install a full intake and turbo inlet pipe as well.
**PLEASE READ - Adding an intake to a Mazdaspeed 3 or 6 can cause a stock high pressure fuel pump to lose pressure causing your engine to run lean. It's recommended you upgrade your high pressure fuel pump internals before this install.**
Parts:
- James Barone Racing Power Path Stage 2 Intake
* Intake Hose
* Billet Aluminum MAF Housing
* Dry Flow Filter
* Turbo Inlet Pipe
Tools we used:
- Flat Head Screwdriver
- 3/8 Ratchet and Various Sockets (mostly 10 mm)
- 12 inch 3/8 Extension
- Needle Nose Pliers
- Vise-grip (not required but helpful)
- Wrenches of Various Sizes
The DIY Rep in this Video is Ally!
To send letters, products for review/use, other correspondence - please use this address:
everythingdiy
P.O. Box 186
Pasadena, CA 91102
FTC Disclaimer:
All products mentioned were purchased by us. None of the companies mentioned are paying us for this video. All opinions are our own.
Other Disclaimers- Everything you do is at your own risk. Everything DIY or its affiliates are not responsible for any personal injury or property damages incurred.
***SAFETY FIRST EVERY TIME***
Видео INTAKE & TURBO INLET INSTALL! канала everythingdiy
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![HOW TO REPLACE A TURBO - STOCK or UPGRADED](https://i.ytimg.com/vi/p-SJh-ktBEc/default.jpg)
![CORKSPORT SHORT RAM INTAKE INSTALL!!! | 2004-2009 Mazda 3 *EPIC INTAKE NOISES*](https://i.ytimg.com/vi/9XGXewBzYjA/default.jpg)
![Corksport Mazdaspeed 3 High Pressure Fuel Pump Internals Installation](https://i.ytimg.com/vi/5cZGxEDUv14/default.jpg)
![Why Not to Buy a Cold Air Intake - Bad Car Mods](https://i.ytimg.com/vi/zofnaV5Bi_Q/default.jpg)
![HOW TO HARDWIRE DASH CAM TO FUSE BOX! THINKWARE F770](https://i.ytimg.com/vi/hZpix4rfVz0/default.jpg)
![Dyno Testing an EBAY "Turbo Power Launcher" Intake Pipe! This Thing is Hilarious...](https://i.ytimg.com/vi/9NNeqZawc7g/default.jpg)
![S&B Turbo Inlet Intake Elbow Install: 04.5-05 GM Duramax LLY #76-1006B](https://i.ytimg.com/vi/nhAPAtG7F_I/default.jpg)
![HOW TO INSTALL A FRONT LIP SPOILER!](https://i.ytimg.com/vi/Sy-C6sj803E/default.jpg)
![Are Aftermarket Intakes Even Worth It?](https://i.ytimg.com/vi/q9ZcPtvTKpY/default.jpg)
![MOUNTUNE CAST INLET MANIFOLD INSTALL! | FOCUS RS](https://i.ytimg.com/vi/khVd4e3FvLo/default.jpg)
![](https://i.ytimg.com/vi/t4mDfwvqwHI/default.jpg)
![HOW TO REPLACE OLD CLUTCH FLUID!](https://i.ytimg.com/vi/21lajVcqq7c/default.jpg)
![Fake Turbo VS Fake Turbo](https://i.ytimg.com/vi/yDOWnyc-C1w/default.jpg)
![How To Install Turbosmart 50/50 Bov On MazdaSpeed 3(Soundclips!!)](https://i.ytimg.com/vi/bJM6Bm78cHs/default.jpg)
![TOP 5 AMAZON MODS FOR MAZDASPEED 3!](https://i.ytimg.com/vi/9RUT9f0rhpM/default.jpg)
![Turbo Inlet Hose Install on Mazdaspeed3, Turbo Noises!](https://i.ytimg.com/vi/NilBTapg4_Y/default.jpg)
![HPFP Mazdaspeed 3 Autotech Internals Install How To](https://i.ytimg.com/vi/UmerRl5r9eg/default.jpg)
![CORKSPORT CARBON FIBER HOOD SCOOP INSTALL](https://i.ytimg.com/vi/3KgT4YHQ61M/default.jpg)
![COBB MAZDASPEED3 Gen 2 Turbo Inlet Hose Install Video](https://i.ytimg.com/vi/kVbhZ8g6qow/default.jpg)
![2007 Mazda Speed 3 turbo back exhaust replacement](https://i.ytimg.com/vi/JQeqzsGzgH4/default.jpg)