DIY RTK GNSS: Part 3 – NTRIP Client
HardwareX article: https://doi.org/10.1016/j.ohx.2021.e00203
A guide to configuring a ublox ZED-F9P GNSS module as both a NTRIP Caster / base station and NTRIP Client / rover, together with surveying methods (averaging and PPP). Based on trial and error and following other tutorials, the information presented is a configuration demonstration which showcases our own working implementation. Improvements and suggestions welcome, as there certainly is room for improvement in understanding all the functionally provided by the numerous hardware features and software features.
Part 1: Surveying and PPP
Part 2: NTRIP Caster configuration which transmits correction data to RTK2GO
Part 3: NTRIP Client configuration which receives correction data from the NTRIP Caster, providing RTK functionality with 14 mm accuracy.
Data House: https://www.up.ac.za/eng4/article/2938832/data-house
Antenna: Tallysmann 33-1889-00-5000 (SMA Connector)
ublox ZED-F9P breakout: https://www.sparkfun.com/products/16481
LattePanda: http://www.lattepanda.com/products/3.html
RTK2GO: http://www.rtk2go.com/
RTK2GO engineerin4 mountpoint: http://rtk2go.com:2101/SNIP::MOUNTPT?NAME=engineering4
RTKLIB: http://www.rtklib.com/ Hardware article: link to be added in due course
Canadian Spatial Reference System Precise Point Positioning (CSRS-PPP) service: https://webapp.geod.nrcan.gc.ca/geod/tools-outils/ppp.php
Видео DIY RTK GNSS: Part 3 – NTRIP Client канала Dr. Andre Broekman
A guide to configuring a ublox ZED-F9P GNSS module as both a NTRIP Caster / base station and NTRIP Client / rover, together with surveying methods (averaging and PPP). Based on trial and error and following other tutorials, the information presented is a configuration demonstration which showcases our own working implementation. Improvements and suggestions welcome, as there certainly is room for improvement in understanding all the functionally provided by the numerous hardware features and software features.
Part 1: Surveying and PPP
Part 2: NTRIP Caster configuration which transmits correction data to RTK2GO
Part 3: NTRIP Client configuration which receives correction data from the NTRIP Caster, providing RTK functionality with 14 mm accuracy.
Data House: https://www.up.ac.za/eng4/article/2938832/data-house
Antenna: Tallysmann 33-1889-00-5000 (SMA Connector)
ublox ZED-F9P breakout: https://www.sparkfun.com/products/16481
LattePanda: http://www.lattepanda.com/products/3.html
RTK2GO: http://www.rtk2go.com/
RTK2GO engineerin4 mountpoint: http://rtk2go.com:2101/SNIP::MOUNTPT?NAME=engineering4
RTKLIB: http://www.rtklib.com/ Hardware article: link to be added in due course
Canadian Spatial Reference System Precise Point Positioning (CSRS-PPP) service: https://webapp.geod.nrcan.gc.ca/geod/tools-outils/ppp.php
Видео DIY RTK GNSS: Part 3 – NTRIP Client канала Dr. Andre Broekman
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
2022-03-03 06h403D Digitization of APT Pavement SectionsEngineering 4.0 - First Floor Concrete PourSBZ321 - Load Cell Calibration Practical Guide #TheUPWayB200 - Part 1: 3D Clock Model, Operation and ComplicationsUP's Railway Test Track 2018 (Mavic Air)UP's Engineering 4 - First Photogrammetry Flight (Mavic Air)Krab Training & RRV Testing 2021 - Chair in Railway Engineering, University of PretoriaEngineering 4.0 - SANRAL Reference & University of Pretoria Civil Engineering LaboratoryPierre Van Ryneveld 100 Year Anniversary - Harvard Flybys at Engineering 4.0 (4K)B200 - Part 4: Gold Leafing 3D PrintsKli-Pi 2017 - A Year in ReviewLIDAR Digitization of the Pierre Van Ryneveld MonumentJCP 2014 Group 3, Computer RepairEngineering 4.0. - A Virtual Reality TourSBZ321 - Potentiometer Practical Guide #TheUPWayB200 - Part 7: Clock AssemblyFor the BirdsIHHA2017 - Cape Town, South AfricaB200 - Part 5: Gold Leaf Laser Engraving