Make a Clone of you IR Remote! How to make Infrared Remote Controller using Arduino [Step by Step]

DIY IR Remote Controller using Arduino - In this video, we will create an Arduino IR Remote Control within 5 minutes. Who doesn't like to play around with Arduino? Let's build something useful.

It's cool to make your own PCBs for your DIY Project right? It's Super Easy!

Try Altium for Free to Design your own PCB for your Project -- https://rootsaid.com/altium/

When you purchase an item like a television or an air conditioner that can be controlled remotely, you will often only receive one remote control with your purchase, right? What about making a duplicate of an infrared remote controller? In this video, I will demonstrate how you can use Arduino to replicate an infrared (IR) remote control by showing you how to make your own.

I will walk you through the entire process of making your very own Arduino IR Remote Controller, from walking you through the circuit to walking you through the programming.

How exactly does an infrared (IR) remote control work?
The signals that are sent from an IR remote, also known as a transmitter, are transmitted to the device that they control through the use of infrared light. It does it by sending out bursts of virtually undetectable infrared light, which correlate to particular binary codes.

These codes reflect commands, such as turning the power on, increasing the volume, or decreasing the channel. The controlled device, which is also known as the receiver, is responsible for converting the infrared light pulses into a binary code that the device's internal CPU can comprehend. The microprocessor will begin carrying out the orders as soon as the signal has been decoded.

Objective
Therefore, in order to construct a clone of a remote controller, the first thing we need to do is find out what is being communicated by the remote when you press a specific button on the remote controller. This will allow us to create a clone of the remote controller. Second, with the help of our apparatus, we will need to press a button in order to re-execute the code.

In order for this to be possible, we are going to construct a simple circuit, read the information from the actual remote controller, and then replay the signals to the device.

Get Complete Codes and Instructions - https://rootsaid.com/ir-remote-arduino-hack/

Видео Make a Clone of you IR Remote! How to make Infrared Remote Controller using Arduino [Step by Step] канала Arduino Projects & Robotics Tutorials - RootSaid ✅