iPhone 6 Plus FPC Digitizer Connector Repair

This is an iPhone 6 Plus FPC digitizer connector repair.

For daily repair posts follow on Facebook: https://www.facebook.com/MobileLabUK
To find out more services and repairs we offer please contact us on Facebook =)

Mobile Lab
Gadgets Repair and Micro Soldering Specialists
Nottingham, United Kingdom

Steps To Perform Repair
1. Apply flux and low melt solder to broken connector.

2. Use a heat gun at approx 230 degrees full air flow to remove connector.

3. Clean pads so they are smooth and flat using flux, low melt solder and solder wick.

4. Position new connector and apply flux.

5. Apply solder to each pad staring in the four corners.

6. Ensure that there is a good connection on each pad checking with a needle.

7. Clean area with isopropyl alcohol and make sure all flux is cleared and the area is dry.

8. Test with screen to make sure everything is working fine.

Видео iPhone 6 Plus FPC Digitizer Connector Repair канала Repair Outlet