How to install sump pump system ASAP PLUMBING DRAIN CLEANING CAST IRON REPAIRS 904-346-1266

How to install a sump pump system

Video sponsored by
Asap plumbing and pump services
Jacksonville 904-346-1266
Gainesville. 352-335-8555
Serving all of florida
Have tools will travel

Cfc. 056659

State certified plumbing contractor
HOW TO REPAIR A SEWER LINE USING SEWER VIDEO TO FIND THE PROBLEM BY ASAP PLUMBING wo#
..........ASAP PLUMBING WILL BE HAPPY TO HELP YOU find your sewer line problems. Do you have multiple stoppages, do you have constant reocurring drain issues. Call ASAP PLUMBING AT JACKSONVILLE FLORIDA OFFICE 904-346-1266 OR GAINESVILLE FLORIDA OFFICE 352-335-8555...
HAVE TOOLS WILL TRAVEL TO YOU.....

HOW TO VIDEO A CAST IRON SEWER LINE BY ASAP PLUMBING CALL 1-904-346-1266
ASAP PLUMBING HAS TOOLS AND WILL TRAVEL TO HELP YOU WITH YOUR PLUMBING AND SEWER PROBLEMS..... INSURANCE COMPANYS MAY PAY UP TO 15K IN SEWER LINE REPLACEMENTS AND DAMAGE.
ASAP PLUMBING CAN HELP YOU WITH YOUR INSURANCE CO.
CALL 1-904-346-1266

------------------------------------------------------------------------------------------------------------------------------
The oldest cast iron water pipes date from the 17th century and were installed to distribute water throughout the gardens of the Chateau de Versailles. These amount to some 35 km of pipe, typically 1 m lengths with flanged joints. The extreme age of these pipes make them of considerable historical value. Despite extensive refurbishment in 2008 , 80% remain original.

Cast iron proved to be a beneficial material for the manufacture of water pipes and was used as a replacement for the original elm pipelines utilized earlier. These water pipelines were composed of individually cast pipe sections, often termed sticks, jointed together by a variety of joint mechanisms. Flanged joints consisted of flat machined surfaces that were tightly bolted together with a gasket between them to prevent leakage. This type of pipe joint is still in use today, typically for above-ground pipelines in water treatment and manufacturing plants.
Typical leaded bell-and-spigot joint used for cast iron pipe

In a bell and spigot joint one end of the pipe stick is flared, termed the bell or socket, to enable the opposite end of the next stick, the spigot end, to be inserted to create a joint. The gaps in these joints were stuffed with oakum or yarn to retain molten-lead, which solidified into a waterproof joint. This was a labor-intensive operation, and the quality of the seal was dependent on the skill of the laborer.

Mechanical joints were made by bolting a movable follower ring on the spigot close to the corresponding bell, which compressed a gasket in between. Many water pipes today use mechanical joints, since they are easily made and do not require special skills to install. This type of joint also allows some deflection to occur without sacrificing joint integrity, so that minor alignment adjustments can be made during installation, and the joints retain their integrity when subjected to limited subsidence. Typical joint deflections at mechanical joints today range anywhere from 3 to 5 degrees.

Ball-and-socket joints introduced more 'rounded' sockets, allowing a relatively large amount of deflection at each joint. This type of joint, still in use today, was considered a special-purpose joint, and has been used primarily in both submerged and mountainous terrain. This type of joint can typically allow around 15 degrees of deflection at each joint, making 'snaking' of the pipe possible. The advantage of this joint type was that it was quicker than bell and spigot joints, and did not require special skills or tools to install.

Push-on joints, developed in the mid 1950s, allowed a quicker and relatively non-skilled method of jointing pipe. This joint consisted of a bell with a recessed groove which held a rubberized gasket. A lubricated beveled spigot section can be pushed into this joint with care, as not to roll the rubberized gasket, and once installed became watertight. This type of jointing system is popular today with ductile iron and Polyvinyl chloride (PVC) pipes.

Видео How to install sump pump system ASAP PLUMBING DRAIN CLEANING CAST IRON REPAIRS 904-346-1266 канала L JR