Anycubic Mega Zero 3D Printer Unboxing, Assembly and Review
In this video I unbox and assemble the Anycubic Mega Zero, an entry level beginner 3D printer. It's very affordable and so far seems to be working awesome. I give my impressions and short review of this printer and plan on doing a follow up video after using this for an extended period of time to see how it holds up.
*Correction, the print bed is metal not glass as I mention in the video. Also I peeled off the print surface as the painters tape would sometimes pull off, IMO it prints much better with out it.
Link to the Anycubic Mega Zero:
https://www.anycubic.com/products/mega-zero?variant=32178984747139
https://www.amazon.ca/gp/product/B083W4SWH2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
If you want to help out with printing PPE check out this website:
http://www.3dprintedppe.com/
My previous reviews for the Anycubic Mega-S
https://youtu.be/B4Kp1nXagLg
https://youtu.be/ZWsPoFJg0tI
How to Make a 3D Printed a Surfboard
https://youtu.be/U9EgwWx5bJg
Follow me on Instagram:
https://www.instagram.com/therealandreww/
---------------------------------------------------------------------------------------------------------
The following Amazon affiliate links help me build the channel, I get a small percentage of the sale but it costs you nothing though!
Camera Gear I Use to Make Videos (affiliate links):
Main Camera
Sony A6500 - https://amzn.to/2Lzz73i
Sigma - https://amzn.to/2QorbWf (Amazing Lens)
Small Rig Cage - https://amzn.to/2C1r2A1
Travel Cameras
Sony RX100V - https://amzn.to/2D5Z3SH
GoPro Hero7 Black https://amzn.to/2LGIFK7
GoPro Hero5 Session - https://amzn.to/2D8xl85
Canon M6 - https://amzn.to/2CFHbx8
B-Camera
Canon 80D - https://amzn.to/2CHTOaT
Canon EF-S 10-18mm - https://amzn.to/2D4sKUt
Canon EF-S 55-250mm - https://amzn.to/2CH70gd
Canon EF-S 24mm - https://amzn.to/2yAlj3t
Audio:
Rode VideoMic Pro+ - https://amzn.to/2D7UcQS
Rode VideoMic Micro - https://amzn.to/2CH7AdT
Blue Yeti USB Mic - https://amzn.to/2QumWsE
#anycubic #3dprinting
Видео Anycubic Mega Zero 3D Printer Unboxing, Assembly and Review канала Andrew W
*Correction, the print bed is metal not glass as I mention in the video. Also I peeled off the print surface as the painters tape would sometimes pull off, IMO it prints much better with out it.
Link to the Anycubic Mega Zero:
https://www.anycubic.com/products/mega-zero?variant=32178984747139
https://www.amazon.ca/gp/product/B083W4SWH2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
If you want to help out with printing PPE check out this website:
http://www.3dprintedppe.com/
My previous reviews for the Anycubic Mega-S
https://youtu.be/B4Kp1nXagLg
https://youtu.be/ZWsPoFJg0tI
How to Make a 3D Printed a Surfboard
https://youtu.be/U9EgwWx5bJg
Follow me on Instagram:
https://www.instagram.com/therealandreww/
---------------------------------------------------------------------------------------------------------
The following Amazon affiliate links help me build the channel, I get a small percentage of the sale but it costs you nothing though!
Camera Gear I Use to Make Videos (affiliate links):
Main Camera
Sony A6500 - https://amzn.to/2Lzz73i
Sigma - https://amzn.to/2QorbWf (Amazing Lens)
Small Rig Cage - https://amzn.to/2C1r2A1
Travel Cameras
Sony RX100V - https://amzn.to/2D5Z3SH
GoPro Hero7 Black https://amzn.to/2LGIFK7
GoPro Hero5 Session - https://amzn.to/2D8xl85
Canon M6 - https://amzn.to/2CFHbx8
B-Camera
Canon 80D - https://amzn.to/2CHTOaT
Canon EF-S 10-18mm - https://amzn.to/2D4sKUt
Canon EF-S 55-250mm - https://amzn.to/2CH70gd
Canon EF-S 24mm - https://amzn.to/2yAlj3t
Audio:
Rode VideoMic Pro+ - https://amzn.to/2D7UcQS
Rode VideoMic Micro - https://amzn.to/2CH7AdT
Blue Yeti USB Mic - https://amzn.to/2QumWsE
#anycubic #3dprinting
Видео Anycubic Mega Zero 3D Printer Unboxing, Assembly and Review канала Andrew W
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Review of the $150 Anycubic Mega Zero 3D Printer](https://i.ytimg.com/vi/b1P-JeM6b_Q/default.jpg)
![Impressions 2 weeks in with Anycubic Mega Zero](https://i.ytimg.com/vi/JuYLMMuaWjo/default.jpg)
![Anycubic I3 Mega-S, Unboxing, Assembly, Set-up & First Print](https://i.ytimg.com/vi/8RGnkH_DSwk/default.jpg)
![Anycubic Mega Zero 2.0 Review | Budget Printer Option](https://i.ytimg.com/vi/VwtRNc1Cm6M/default.jpg)
![Onewheel Pint Battery Upgrade | with DeWalt Flexvolt](https://i.ytimg.com/vi/KzqJV5YvALk/default.jpg)
![Complete beginner's guide to 3D printing - Assembly, tour, slicing, levelling and first prints](https://i.ytimg.com/vi/T-Z3GmM20JM/default.jpg)
![Unboxing and Review Of The BRAND NEW Anycubic Mega Zero 2.0](https://i.ytimg.com/vi/sItZLzyxqjs/default.jpg)
![Anycubic Mega Zero - First impressions](https://i.ytimg.com/vi/dduOnGCTPeY/default.jpg)
![Cura 3D Slicer For Beginners! In Depth Tutorial](https://i.ytimg.com/vi/eUNTlb5pEWA/default.jpg)
![Mega Upgrade - Anycubic i3 Mega - S - Fan and Stepper Driver Upgrade - Chris's Basement](https://i.ytimg.com/vi/ywscQehQ80M/default.jpg)
![AnyCubic Mega Zero 3D Printer Unboxing and Review](https://i.ytimg.com/vi/GDzWhLEZRU8/default.jpg)
![Anycubic Mega Zero leveling operation video](https://i.ytimg.com/vi/J5MNyBKhsKk/default.jpg)
![Resin 3D Printing: SLA vs. MSLA vs. FDM - Elegoo Mars Review and Setup](https://i.ytimg.com/vi/5O87NZoiPTc/default.jpg)
![Your 3D Printer can't do this... Naomi Wu's 3DPrintMill / Creality CR-30 Review](https://i.ytimg.com/vi/VvSbcUowlNU/default.jpg)
![BEST BEGINNER 3D PRINTER? - Anycubic i3 MEGA VS CR-10 - Honest Review](https://i.ytimg.com/vi/DVQcxMoXfDQ/default.jpg)
![Anycubic Mega Zero 3 months of use review and advice](https://i.ytimg.com/vi/xI1mOjbbXhs/default.jpg)
![Anycubic Mega Zero unboxing and Installation](https://i.ytimg.com/vi/HMo2w-7BJbg/default.jpg)
![🔥 Anycubic Mega Zero 🔥 3D Printer ! Testing different Filament Types ! All-Rounder ? Impressively](https://i.ytimg.com/vi/3lPcy_moqHE/default.jpg)
![Review Of The Anycubic I3 Mega X 3D Printer](https://i.ytimg.com/vi/0RkdCZe3BPM/default.jpg)
![Labists VS Anet ET4 3D Printers](https://i.ytimg.com/vi/gzx75yWc5BY/default.jpg)