ProMaxx SBC 247/319 To Edelbrock RPM 1206 Match 9.4
www.headbytes.com 615-212-7168
Anyone that says you cannot make a 1206 Fel Pro Gasket/Runner work is WRONG, and I prove it here for sure. YES, it was HARD AS HELL to do, but I did it without busting through. I use the Brzezinski Plate with dowel pins to get a 100% alignment between the two.
Видео ProMaxx SBC 247/319 To Edelbrock RPM 1206 Match 9.4 канала Headbytes Porting
Anyone that says you cannot make a 1206 Fel Pro Gasket/Runner work is WRONG, and I prove it here for sure. YES, it was HARD AS HELL to do, but I did it without busting through. I use the Brzezinski Plate with dowel pins to get a 100% alignment between the two.
Видео ProMaxx SBC 247/319 To Edelbrock RPM 1206 Match 9.4 канала Headbytes Porting
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Gasket Matching Tools, Tips, and Tricks](https://i.ytimg.com/vi/izhxm2vk6Jo/default.jpg)
![ProMaxx 200 NEW Intake Cutaway 3.0](https://i.ytimg.com/vi/BZzudIxHY0g/default.jpg)
![Promaxx maxx series heads unbox and overview sbf](https://i.ytimg.com/vi/fjCykTSoMTE/default.jpg)
![Dyno Death March! We Test 5 Jeep Cylinder Heads [How Much is Porting Worth?]](https://i.ytimg.com/vi/qPnC58wK6Lw/default.jpg)
![](https://i.ytimg.com/vi/CweEdFXJKoE/default.jpg)
![Gasket Matching an Aluminium Edelbrock Intake on a Small Block Mopar 360 and Unboxing New Heads!](https://i.ytimg.com/vi/n5xicOb-ChM/default.jpg)
![ProMaxx NEW SBC 200 W/.100 Extra Raised Roof CUT MARKS 1.4](https://i.ytimg.com/vi/ZI5F121sqPw/default.jpg)
![SBC intake manifold porting (STEP 2 INTAKE) Video 4](https://i.ytimg.com/vi/22IBewqvrxA/default.jpg)
![Ford TUNNEL PORT 427 FE Head Vs ProMaxx "NEW" FE Head 1.0](https://i.ytimg.com/vi/UN6ory39L7U/default.jpg)
![$165 Amazon SBC Head vs Budget AFR Enforcer! (Flow Bench!)](https://i.ytimg.com/vi/pHYXVpH7Y4A/default.jpg)
![Port Match and Polishing Cylinder Heads](https://i.ytimg.com/vi/vuJ5eGwvbfI/default.jpg)
![How to get more power out of your Small block Chevy](https://i.ytimg.com/vi/wYtAY6QqE9Y/default.jpg)
![ProMaxx "NEW" .200 W/.100 EXTRA RAISED ROOF INTAKE 1.0](https://i.ytimg.com/vi/P7RFdYMXhE8/default.jpg)
![Port match the right way !!](https://i.ytimg.com/vi/oRI-GZ4DbWk/default.jpg)
![LT1 heads on the Flow Bench ! 1993 LT1 Home ported heads.](https://i.ytimg.com/vi/sB2H_V3sczk/default.jpg)
![How To Choose a Carbureted Intake Manifold](https://i.ytimg.com/vi/u6Lv4seRlGA/default.jpg)
![BBC IRON 049 Pouring Aluminum in Exhaust Cross Overs 110](https://i.ytimg.com/vi/k6j1JuccvhQ/default.jpg)
![Porting bacics](https://i.ytimg.com/vi/vWm9C2nQR1A/default.jpg)
![Porting Edelbrock RPM Air gap to 1206 gaskets part 2](https://i.ytimg.com/vi/aw82oyM7GF4/default.jpg)
![HOW TO - porting . .polish combustion chambers](https://i.ytimg.com/vi/rXgOWU8E1ks/default.jpg)