How to install Subaru driver side AVCS line WITHOUT removing Timing

While I would recommend removing timing to install the avcs line if you're extremely stubborn or dont have the tools to remove timing here is a video of how to get the avcs bolt in.

You'll have to use a Dremel to remove some material on your timing cover and some sand paper to remove some material from the avcs bolt. once you do that get a friend to pry against the timing cover to push it out as much as possible. you might need to wiggle and fight with it abit but it should slip in.

THIS WILL DAMAGE YOUR TIMING COVER BANJO BOLT AND POTENTIALLY YOUR HEAD CASTING

I RECOMMEND REMOVING TIMING AND DOING THIS THE CORRECT WAY.

Hope this helps someone who made this mistake like I did!

Видео How to install Subaru driver side AVCS line WITHOUT removing Timing канала Subee