Blinking an LED and uploading hex file using USBasp

In this video I have written a program for blinking an LED on port pin PB5 (or DigitalPin13 Arduino mapping) of Atmega328.
I have used Atmel Studio 7 for writing and compiling the code. You can use WinAVR or MikroElectronica's MikroC for AVR.

Following are the links:
Atmel Studio 7 http://www.microchip.com/mplab/avr-support/atmel-studio-7
-------------------------------------------------------------------------------------------------------
WinAVR https://sourceforge.net/projects/winavr/
-------------------------------------------------------------------------------------------------------
AVRDUDESS http://blog.zakkemble.co.uk/avrdudess-a-gui-for-avrdude/
-------------------------------------------------------------------------------------------------------
Basic Circuit and Fuse Bits: https://arduinotoavr.blogspot.com/2018/06/atmega328p-basic-circuit-and.html
-------------------------------------------------------------------------------------------------------
Blink AS7 project https://drive.google.com/open?id=1lzhgBlvZ7im6Iz0upXKtI1lYsdIMuVmd
-------------------------------------------------------------------------------------------------------
I hope you will find this tutorial helpful, thank you!
Please do like, share and subscribe.
P.S. Sorry if my voice is muffled or unclear, I am suffering from cold at the moment.

Видео Blinking an LED and uploading hex file using USBasp канала PhocusTronic