"Vickie" Stirling Hot Air Engine Build - Part 2 (The Rear Frame)
This is the beginning of the CNC work, cutting out the Rear Frame from a piece of 5/8" thick 6061 Aluminum.
Видео "Vickie" Stirling Hot Air Engine Build - Part 2 (The Rear Frame) канала Larry Poindexter
Видео "Vickie" Stirling Hot Air Engine Build - Part 2 (The Rear Frame) канала Larry Poindexter
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Vickie Stirling Engine Crosshead Guide Final Details and (Final Final Wrap)
Ball Crank Handle Build Wrap Up. Part 2 of 2
"Vickie" Stirling Hot Air Engine Build - Part 7 (The Displacer End Caps)
Alcohol Burner Build - Part 1 (The Tank)
Round and Hex Die Holders for the Lathe Tailstock - Part No. 2
"Fizgig" Stirling Hot Air Engine Build - Part 6 (It Finally Runs - Update)
Vickie Crosshead Guide Part - 8 (Segment - B)
Round and Hex Die Holders for the Lathe Tailstock - Part No. 1
Shop Built Hand Shaper Handle and Ram Drive Progress
Shop Built Hand Shaper Build Scraping Progress
Regulator Clock Build Update - First Test Run
Vickie Crosshead Guide Part - 8 (Segment - D)
Regulator Clock Build - Crutch Assembly Continued CNC Work
Shop Built Hand Shaper Progress
Kant Twist Clamp Build Follow-Up
Shop Built Hand Shaper Cutting "Star Wheel" Part 3 (Final Wrap)
Vickie Crosshead Guide Part - 8 (Segment - A)
Brazing Carbide to High Speed Steel
Tiny Kant Clamp Build
Shop Built Hand Shaper Shop Built Vise Test No. 2