How to remove your 2018-2020 Honda Accord Front Bumper Cover (1 of 3)

Watch our detailed step-by-step video on the removal of a 2018-2020 Honda Accord front bumper cover. You only need a few simple tools to get the job done. This is the 1st video part of a 3-part series.

Where to purchase: http://bit.ly/18-20HondaAccordFrontBumper

Source: https://www.revemoto.com

Front Bumper Grille & Accessories: https://www.youtube.com/watch?v=KXYUABZd9Ok
How to install your Accord Bumper: https://www.youtube.com/watch?v=pQhX-Yxwoiw

0:00 Start
0:08 Intro
0:34 Remove the radiator cover
1:56 Remove the clips on the bottom of the bumper
3:15 Splash shield/lower engine cover removal
4:54 Twist the wheel and loosen the fender liner
6:06 Remove the bumper from the bumper retainers near the fender and headlight
7:11 Repeat the process on the opposite side
8:48 Unplug the fog light connectors/plugs
9:30 Completely remove the front bumper
9:37 Outro

Thank you for stopping by and watching our 2018-2020 Honda Accord series or just this front bumper removal video. As we mentioned above, the next two videos in the series will be linked at the end of the video. We sell pre-painted auto body parts and that bumper was our very own, ReveMoto painted Accord bumper. With a couple tools, this is such an easy job to do. We love Honda because they really make it simple to work on your car while having a super safe vehicle.

TOOLS NEEDED:
Philips screwdriver, panel clip remover tool, or a flat-head screwdriver, that's it!

REMOVAL PROCESS:
The removal process is not too difficult. It's actually more of paint to take off all the grilles and brackets but that is another video. We always start by removing the top clips near the radiator. Simply lift up your hood and the clips will be located above your radiator. This Honda has nothing but plastic clips, so be careful not to break any. They can become brittle over time and break easily. They are also pretty cheap at Honda, so they're easily replaceable. Once we were finished with the top clips, we did the same process at the bottom. This is where the bumper attaches to the fender liner and splash guard also referred to as the lower engine cover. Honda kept it simple here and also uses all plastic clips. We love to see it and work on Honda's. Most other vehicles will have a combination of bolts, clips, and screws for the wheel well. Honda just has one plastic clip and three screws. Simplicity at its best. Every bumper clips onto bumper brackets/retainers attached to the fender and underneath the headlight. Pull the bumper off both brackets after removing all the clips and screws. Be careful not to let the bumper come crashing down because you have to disconnect the fog lights. That is the very last step and you have now removed your front bumper cover of your Honda Accord. Congratulations, we knew you could do it!!!

Follow Us on:
FB: https://www.facebook.com/ReveMoto/
IG: https://www.instagram.com/revemoto/
Twitter: https://twitter.com/revemoto?lang=en

_____________________________________
#hondaaccord #painteautoparts #revemoto #accord #honda #highquailty

DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Видео How to remove your 2018-2020 Honda Accord Front Bumper Cover (1 of 3) канала ReveMoto - Pre-Painted Auto Body Parts