MAHO MH400E trouble shooting
After replacing the electrolytics capacitors in the Indramat and in the Phillips PSU, it is time to start trouble shooting.
When I power up the machine, the monitor receives power, and the Phillips controller receives power.
The Phillips should boot, and the display should come up, but currently I have nothing but snow on the monitor.
If I hit the hydraulic start button, the cerntral oiling system activiates correctly, switching off again 16 seconds after it gets pressure.
The hydraulic pump is currrently not reacting.
Видео MAHO MH400E trouble shooting канала RotarySMP
When I power up the machine, the monitor receives power, and the Phillips controller receives power.
The Phillips should boot, and the display should come up, but currently I have nothing but snow on the monitor.
If I hit the hydraulic start button, the cerntral oiling system activiates correctly, switching off again 16 seconds after it gets pressure.
The hydraulic pump is currrently not reacting.
Видео MAHO MH400E trouble shooting канала RotarySMP
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
MAHO'n it in the home shopMAHO CNC Tipps & Tricks E04 – Monitor Reparatur Screen repair MH600E 432/10How I do wiring diagrams for CNC conversions.Maho 700SCnc Router cutting aluminium - Test high speedVariator control - Schaublin CNC - Ep.30LinuxCNC control - Schaublin lathe retrofit - EP.28Maho 400pMAHO MH800CDECKEL MAHO dmc63v - alta velocita + tuffoSchaublin 125-CNC lathe - Ep. 26Maho MH 800 C under power for saleMaho MH800C CNC machining center GermanDECKEL MAHO Pfronten – Precision our passionMaho MH 600 CNC Milling MachineMAHO is Filthy!! (Whose Milling Machine Isn't?)Laying out the electrical cabinet - Schaublin 125-CNC latheMaho MH-400 E Retrofit Touchscreen