Arduino MIDI controller - DART SPECIALE - Pitch-Bend control & Scale-Learn function
This video exemplifies different features of a DART device:
1) MIDI FEEDBACK:
the DIN MIDI OUT connector of the Dart controller in connected to the DIN MIDI INPUT of the Roland Super JX synth, so the synth can be played from the dart controller buttons.
the DIN MIDI OUT of the Roland Super jx is connected to the DIN MIDI INPUT of the Dart device, so the keys that are pressed on the synth keyboard will produce a visual effect on the Dart panel: the LED corresponding to each note will light up.
2)TOUCH RESET function
on the first preset_page of the Dart controller, the TOP and SIDE sinners are set to emulate a Pitch Bend lever. Using the TOUCH RESET function it is possible to rotate the spinner to modify the pitchbend parameter and when the touch sensor is released, the pitchbend parameter is reset to an intermediate position.
3)SCALE LEARN
on the second preset_page of the Dart controller, the TOP spinner is set in SCALE LEARN MODE, so the touch sensor can be used to record a scale of notes, that can be played through the spinner rotation.
👽
https://dartmobo.com
Видео Arduino MIDI controller - DART SPECIALE - Pitch-Bend control & Scale-Learn function канала BiTT Project
1) MIDI FEEDBACK:
the DIN MIDI OUT connector of the Dart controller in connected to the DIN MIDI INPUT of the Roland Super JX synth, so the synth can be played from the dart controller buttons.
the DIN MIDI OUT of the Roland Super jx is connected to the DIN MIDI INPUT of the Dart device, so the keys that are pressed on the synth keyboard will produce a visual effect on the Dart panel: the LED corresponding to each note will light up.
2)TOUCH RESET function
on the first preset_page of the Dart controller, the TOP and SIDE sinners are set to emulate a Pitch Bend lever. Using the TOUCH RESET function it is possible to rotate the spinner to modify the pitchbend parameter and when the touch sensor is released, the pitchbend parameter is reset to an intermediate position.
3)SCALE LEARN
on the second preset_page of the Dart controller, the TOP spinner is set in SCALE LEARN MODE, so the touch sensor can be used to record a scale of notes, that can be played through the spinner rotation.
👽
https://dartmobo.com
Видео Arduino MIDI controller - DART SPECIALE - Pitch-Bend control & Scale-Learn function канала BiTT Project
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DART ONE - Opensource MIDI / DMX Arduino controllerJoystick controlling pitchbend and modulation. Yamaha GenosDIY arduino synthesizer and arpeggiatorUsing Bluetooth Midi With Your Mac or iOS Device! (Mi.1 Wireless Midi Interface)Moog Little Phatty and Jordan Rudess - Pitch BendingArduino MIDI Controller ProjectDART-ONE-Speciale Vs Fidget spinner! MIDI scratch controllerDIY Midi DAW Controller Arduino demoTeensieWI wind controller with modulation and pitch bend controlBest Arduino Music and MIDI Projects Latest 2018DIY USB MIDI CONTROLLER With Arduino Uno Rev 3Arduino MIDI Controller: Part 3 - MultiplexersRaspberry Pi Looper/synth/drum thingArduino MIDI outArduino MIDI to BLE-MIDI (MIDI over Bluetooth Low Energy)MacunDroid - Android VirtualPitchend PA900Pitch Bend TutorialICO - You were there (with an Arduino MIDI Keyboard Controller)Arduino-Powered MIDI Arpeggiator