Demo: Vgate iCar2 OBD-II scan tool telemetry with Ford Duratec HE (Mondeo Mk3)

Follow up of my review of the Vgate iCar2 OBD2 scan tool. This is a demonstration drive showing telemetry from the tool displayed in Forscan on Android. It's also intended to show normal* engine operation.

* The engine featured is a 2002 Ford Duratec HE after ~150,000 km. What's 'normal' here may not be for other engines. Also, you should note the limitations of the scan tool (and the Android video recording) with regard to the data display refresh speed. Reading so many PIDs at once slows it down greatly.

Diagnostics PIDs displayed are...
RPM: engine revs per crank position sensor
VSS: vehicle speed, km/hr
GEAR: drive gear commanded
CHT: cylinder head [coolant] temperature, Celsius
FUELSYS: Open or closed loop
O2S11: O2 sensor bank 1 sensor 1 [sole upstream] volts
O2S12: O2 sensor bank 1 sensor 2 [sole downstream] volts
SHRTFT1: Short term fuel trim, percentage
LONGFT1: Long term fuel trim, percentage
MAP: Manifold absolute pressure, volts
EGRMDSD: Exhaust Gas Recirculation motor desired position

Review of the Vgate iCar2: https://youtu.be/KdvnPC204zU
Amazon links - US: http://amzn.to/2cgqSbU | UK: http://amzn.to/2cd2Jm0

(Using the above Amazon links helps support my channel and is appreciated!)

Видео Demo: Vgate iCar2 OBD-II scan tool telemetry with Ford Duratec HE (Mondeo Mk3) канала Craig's DIY Car