Quintus Technologies Sheet Metal Forming Lab, part 2 - Punch Tool
Read more about our Hydroforming Application Support:
http://quintustechnologies.com/metal-forming/products/application-support/
More Details about Quintus Technologies Sheet Metal Forming Lab:
- Punch tool from the leading edge of an aircraft wing
- The difference between low and high pressure
- Narrow shrink flange in the nose of the tool that will create wrinkles
- Blank material: aluminum alloy 2024, "0" condition, 1.2 mm
- 1st press cycle without blank holder -- 340 bar
- No control on the blank may create wrinkles
- 2nd press cycle, dock the blank holder to the tool -- 1,000 bar
- The blank holder is made of hardwood
Please Note: Avure Technologies has changed it's name to Quintus Technologies.
Видео Quintus Technologies Sheet Metal Forming Lab, part 2 - Punch Tool канала Quintus Technologies
http://quintustechnologies.com/metal-forming/products/application-support/
More Details about Quintus Technologies Sheet Metal Forming Lab:
- Punch tool from the leading edge of an aircraft wing
- The difference between low and high pressure
- Narrow shrink flange in the nose of the tool that will create wrinkles
- Blank material: aluminum alloy 2024, "0" condition, 1.2 mm
- 1st press cycle without blank holder -- 340 bar
- No control on the blank may create wrinkles
- 2nd press cycle, dock the blank holder to the tool -- 1,000 bar
- The blank holder is made of hardwood
Please Note: Avure Technologies has changed it's name to Quintus Technologies.
Видео Quintus Technologies Sheet Metal Forming Lab, part 2 - Punch Tool канала Quintus Technologies
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Sonex_1504 - Forming Aft Wing Ribs.mp4](https://i.ytimg.com/vi/PUgXlYMLAkI/default.jpg)
![Low Cost Hydroforming](https://i.ytimg.com/vi/xw5yEMsDxR8/default.jpg)
![Quintus Technologies Sheet Metal Forming Lab, part 1 - Blank holder](https://i.ytimg.com/vi/RA_a0pD5-UU/default.jpg)
![Hammer Shaping Metal By Hand](https://i.ytimg.com/vi/kUC9LyeLBtU/default.jpg)
![3D Printed Sheet Metal Forming - Will it Survive?](https://i.ytimg.com/vi/fxzqkhmcRlY/default.jpg)
![Bearhawk Patrol - Part 3: FOrming lightening holes with Rubber Pad Forming](https://i.ytimg.com/vi/SYnX5-2m4HQ/default.jpg)
![Making a Sheet Metal Die - Upper Die and Making the First Part](https://i.ytimg.com/vi/oA4cNrDFMzk/default.jpg)
![My hydroforming machine](https://i.ytimg.com/vi/r2qiEr88Z20/default.jpg)
![3 Tools for creating Flanges in lightening holes - Experimental Aircraft](https://i.ytimg.com/vi/rlUth-Lt474/default.jpg)
![Forming With Rubber on the Hydraulic Press](https://i.ytimg.com/vi/eZ062_wUWCE/default.jpg)
![Fluid Forming | Das Prinzip](https://i.ytimg.com/vi/kionUm8dzck/default.jpg)
![Hydroform](https://i.ytimg.com/vi/A66iw8P5NQ4/default.jpg)
![EF-60 Edge Forming Tool Demo](https://i.ytimg.com/vi/DbAEuFbFaco/default.jpg)
![Quintus Technologies Hydroforming Fluid Cell Press type QFC 1.2x3-1000](https://i.ytimg.com/vi/MzFCC6o9iP4/default.jpg)
![Making a Sheet Metal Forming Press Die - Test](https://i.ytimg.com/vi/7ZKS7ZDRVZw/default.jpg)
![Building a Fender - Part 1](https://i.ytimg.com/vi/Ktj5DWaKXYI/default.jpg)
![Making Benchtop Metal Cutting Shears](https://i.ytimg.com/vi/LzpV6T9Yltc/default.jpg)
![Metal Stamping/Embossing with 3D Printed Molds - It's EASY!](https://i.ytimg.com/vi/qSZXNcnryqU/default.jpg)
![Quintus Technologies Deep Draw Hydroforming Press QFM 0.8-800](https://i.ytimg.com/vi/vMwi5UBCCM0/default.jpg)
![Metal Shaping for Beginners: English Wheel Basics](https://i.ytimg.com/vi/cHm3-lu3e2Q/default.jpg)