DIY: 3-Tier Raised Garden Bed Under $100.00!

Do you want to build your own 3-tier raised garden bed for under $100.00? In this video, I'll explain how to do just that! My wife searched Pinterest and before you know it, I had to build her similar planters. I'll explain everything on how YOU can build the same set up.
_______________________

Materials Needed:

- (6) 2x8x10 - https://www.homedepot.com/p/2-in-x-8-in-x-10-ft-2-and-Better-Prime-Douglas-Fir-Board-604364/206182008

- (1lb) T25 3" Deckmate Screws: https://www.homedepot.com/p/Deck-Mate-9-x-3-in-Star-Flat-Head-Wood-Deck-Screws-1-lb-Pack-3DMR1/305418735

______

Optional Materials Needed [ If doing the 2x4 Cap Railing + Plywood Bottom in Middle and Top Box]:

- (5) 2x4x8 [For the 45° Cap]- https://www.homedepot.com/p/2-in-x-4-in-x-8-ft-Premium-Standard-and-Better-Douglas-Fir-Lumber-441317/202094172

- (2) 1x2x8 [Ref. 9:02] - https://www.homedepot.com/p/1-in-x-2-in-x-8-ft-Premium-Kiln-Dried-Square-Edge-Whitewood-Common-Board-914584/100037592

- (1) 4x8x1/2 Plywood [Ref. 9:59] - https://www.homedepot.com/p/Sheathing-Plywood-Common-15-32-in-x-4-ft-x-8-ft-Actual-0-438-in-x-48-in-x-96-in-20159/206827282

- (1lb) T20 2" Deckmate Screws: https://www.homedepot.com/p/Deck-Mate-8-x-2-in-Star-Flat-Head-Wood-Deck-Screws-1-lb-Pack-2DMR1/305418740

_______________________

Cut List:

Box #1 -
(2) 2x8 @ 96"
(3) 2x8 @ 24"

Box #2 -
(2) 2x8 @ 48"
(3) 2x8 @ 24"
--- If you're doing plywood bottoms, cut these below as well. ---
(2) 1x2 @ 23-1/2" [These are used like I did at 9:02]
(2) 1x2 @ 20" [These are used like I did at 9:02]
(1) 22-1/4" x 23-3/4" Plywood Base [Reference 9:59]

Box #3 -
(4) 2x8 @ 24"
--- If you're doing plywood bottoms, cut these below as well. ---
(2) 1x2 @ 23-1/2" [These are used like I did at 9:02]
(2) 1x2 @ 19-1/4" [These are used like I did at 9:02]
(1) 20-3/4"x23-3/4" Plywood Base [Reference [9:59]

------------

Optional 2x4" Cap [Seen at 13:05]
(#'s given are measured on longest point of 45°)
[The dimensions below will give you a 1" overhang around the whole planter]

Box #1 - [Bottom]
(2) 2x4 @ 49" long point of a 45° [Square on one end, 45° on the other]
(1) 2x4 @ 29" long point to long point of a 45°

Box #2 - [Middle]
(2) 2x4 @ 25" long point of a 45° [Square on one end, 45° on the other]
(1) 2x4 @ 29" long point to long point of a 45°

Box #3 - [Top]
(2) 2x4 @ 29" long point to long point of a 45°
(2) 2x4 @ 26" long point to long point of a 45°

Pre-assemble these first, drop them in place, evenly space them 1" from the outside of planter box and screw them down into the 2x8 of the planter.

__________________________

Did you use this DIY guide to build your own DIY 3-Tier Planter Box? E-mail me photos, I'd LOVE to see them!

E-mail: MattBangsWoodManagement@gmail.com

__________________________
Tools used:

Skilsaw 54V: https://amzn.to/2xjEPnn

Makita 18V Drill: https://amzn.to/2WoltpN

Tape Measure: https://amzn.to/2WolBWj

Speed Square: https://amzn.to/2zAqF1M

Видео DIY: 3-Tier Raised Garden Bed Under $100.00! канала MattBangsWood en Español