Thezur Valken Shark Fin V Guitar entry for the Great Guitar Build Off 2021 Episode 2.2 of 6.
This is the third video in the series of the Great Guitar Build Off 2021 competition entry from Thezur Valken guitars.
In this video I drill the guide holes for the router and route the Truss Rod channel and then finish by cutting the headstock break angle.
#greatguitarbuildoff2021
Видео Thezur Valken Shark Fin V Guitar entry for the Great Guitar Build Off 2021 Episode 2.2 of 6. канала Thezur Valken Guitars
In this video I drill the guide holes for the router and route the Truss Rod channel and then finish by cutting the headstock break angle.
#greatguitarbuildoff2021
Видео Thezur Valken Shark Fin V Guitar entry for the Great Guitar Build Off 2021 Episode 2.2 of 6. канала Thezur Valken Guitars
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
25. Fretboard end binding
41. Gold resin fretboard markers
Before a clear coat, the colour needs a touch up. #woodworking #guitardesign #guitarmaker
26. Finishing the fretboard binding
TVG GGBO2021 Episode 2 4
17. Fitting truss rod and cutting carbon fibre reinforcing rods
7. Cutting the timber to turn into a neck for the Suntiger guitar
44. Routing the LED wire channel and gluing in the LEDs #ggbo2023
19. Planing fretboard and marking fret slots for multiscale fretboard
4. Cutting piece of Wenge for the neck
37. Cutting beautiful black Wenge into a guitar body #ggbo2023
Thezur Valken guitars restores a BC Rich Warlock Body Art Collection The Fly
21. Experimenting with LEDs using carbon fibre rods #ggbo2023 #woodworking #scratchbuild
43. Putting resistors on surface mount LEDs #ggbo2023
Thezur Valken Guitars restoration G&L ASAT Classic Episode 2
8. Planing the neck wood for the Suntiger guitar
38. Shaping the beautiful black Wenge body #ggbo2023
Thezur Valken's first guitar build
Ushaka gets the first clear coat #woodworking #guitardesign #diy #guitarmaker #guitarmania #art
24. Planing down the new neck binding
16. Routing the truss rod channel