Brush On Mold Of A Monster Clay Sculpt With Gel-25 And BR-75D

In this tutorial we use PlatSil Gel-25 to make a brushed-on silicone mold. For the support shell we used our new BR-75D self-thickening resin. Many of you have asked about amounts of materials used. Over all, this mold took a little under 3 lbs of Gel-25 and about 1.5 lbs of BR-75D. As stated in the video, I could have cut way back on the BR-75D and it would still have been a very strong mother mold. The finished silicone mold was about 3/8" thick on average. The mother mold was about the same thickness.

As mentioned in the video, here's a link to the video where Robert uses his CES tools to sculpt the ghoul head in this video: https://www.brickintheyard.com/collections/tools

Here's what we used:
Monster Clay: https://www.brickintheyard.com/collections/clays-for-sculpting-mold-making
PlatSil Gel-25 is here: https://www.brickintheyard.com/collections/platsil-gels
Silicone additives, such as TinThix and Silicone Pigments are here: https://www.brickintheyard.com/collections/silicone-additives-accessories
BR-75D resin is here: https://www.brickintheyard.com/collections/casting-resin

Видео Brush On Mold Of A Monster Clay Sculpt With Gel-25 And BR-75D канала Brick In The Yard Mold Supply