Rule LoPro Bilge Pump
LOW PROFILE BILGE PUMPS FOR TIGHT SPACES
Designed to bring pumping power to tight spaces, Rule’s LoPro Series Bilge Pumps are only 2.4" (6cm) high. The LP900S model features two automated modes. The first one engages the pump when the water level reaches 2" (5cm) or 1.3" (3.25cm) (user choice); and the second one checks for water by briefly turning on the pump every 2-1/2 minutes. The LP900D model uses a traditional float and/or panel switch for operation.
FEATURES AND BENEFITS
• Multiple modes of operation. The LP900S features two automated modes of operation.
• High or low water sensing mode. The pump starts when water reaches 2" (5cm). By turning the motor cartridge upside down, the sensor is at 1.3" (3.25cm).
• Electronic automatic mode. The pump automatically turns on every 2-1/2 minutes to check for water, and if it’s detected, the pump stays on until the water is gone.
• Fully rotating discharge body. The entire body swivels up to 180º, making for an easy plumbing installation.
• Threaded discharge nozzle. Multiple ports are available for this pump: 3/4" (19mm) straight, 3/4" (19mm) right angle, 1" (25mm) and 1-1/8" (28mm).
• All ports are included in the aftermarket package.
• New tricuspid check valves help prevent backflow.
• Horizontal or vertical mounting. The LP900S and LP900D feature a variety of mounting options to accommodate a boat's bilge.
Видео Rule LoPro Bilge Pump канала Xylem Boat & RV Solutions
Designed to bring pumping power to tight spaces, Rule’s LoPro Series Bilge Pumps are only 2.4" (6cm) high. The LP900S model features two automated modes. The first one engages the pump when the water level reaches 2" (5cm) or 1.3" (3.25cm) (user choice); and the second one checks for water by briefly turning on the pump every 2-1/2 minutes. The LP900D model uses a traditional float and/or panel switch for operation.
FEATURES AND BENEFITS
• Multiple modes of operation. The LP900S features two automated modes of operation.
• High or low water sensing mode. The pump starts when water reaches 2" (5cm). By turning the motor cartridge upside down, the sensor is at 1.3" (3.25cm).
• Electronic automatic mode. The pump automatically turns on every 2-1/2 minutes to check for water, and if it’s detected, the pump stays on until the water is gone.
• Fully rotating discharge body. The entire body swivels up to 180º, making for an easy plumbing installation.
• Threaded discharge nozzle. Multiple ports are available for this pump: 3/4" (19mm) straight, 3/4" (19mm) right angle, 1" (25mm) and 1-1/8" (28mm).
• All ports are included in the aftermarket package.
• New tricuspid check valves help prevent backflow.
• Horizontal or vertical mounting. The LP900S and LP900D feature a variety of mounting options to accommodate a boat's bilge.
Видео Rule LoPro Bilge Pump канала Xylem Boat & RV Solutions
Показать
Комментарии отсутствуют
Информация о видео
11 октября 2016 г. 20:26:29
00:02:14
Другие видео канала
Xylem LoPro Bilge Pump - IBEX 2016Tips for the Rule LoPro Bilge Pumprule low pro bilge pump. dry bilge. 900 gpm dry bilge pump. rule lp900sHow Does a Hydraulic Ram Pump Work?What is Air Lock?Rule Submersible Bilge Pumps - The Next GenerationHow to Make Water Pump 6 Inches With Engine Farmer Machine Diy Water Pump 6 Inch Borewell MachineRule - Identifying the 3 Wires on the Rule Bilge PumpsNo more water in your bilge with RULE'S Dry Bilge Pump!Making a new FIBERGLASS HATCH from a MOLDGoing on Vacation !! I've got to put this DECK back together FAST I More Stringer & Deck RepairsExplaining an Airlock in a Bilge Hose - Rule Bilge PumpsDon’t Buy An Automatic Bilge Pump Till You’ve Watched ThisCleaning a RuleMate PumpBilge PumpsBest Saltwater Washdown Pump - Top five Washdown PumpServicing A Jabsco Quiet Flush Toilet - 37045 - 37245 SeriesHow Does a Marine Toilet Macerator Pump Work from Raritan Marine?Whale OilUnblocking a Jabsco toilet system - Boat Maintenance