Stanley Meyer's Transformer ACTUALLY Works - Live Test ⚡

They said Stanley Meyer's circuit was fake. Here's the oscilloscope proof it actually works. ⚡

👉 Want to see the complete VIC build from scratch? Start here: https://youtu.be/VDycByDQWHs

Testing the 12V Arduino drive signal that powers Stanley Meyer's transformer. This is the pulse that starts the resonance cascade in a real water fuel cell VIC.

Before we can tune for resonance, we need to verify the gate switching signal is clean. This oscilloscope test shows the raw waveform from the Arduino before it hits the MOSFET driver circuit.

⚡ TIMESTAMPS:
0:00 - Drive Signal Overview
0:06 - 12V Arduino Output
0:12 - Gate Switching Verified
0:18 - Waveform Analysis
0:22 - Next Steps

⚡ CIRCUIT CONNECTIONS:
PSU negative, Nano GND, and scope ground all connected together
Primary one end to +12V
Primary other end to MOSFET drain
MOSFET source to GND
MOSFET gate to optocoupler output
Scope probe to MOSFET drain and board GND

Part 2: Shaping this waveform for maximum voltage intensification.

Rebuilding Stanley Meyer's water fuel cell with blueprint-level documentation. Every test, every failure, every breakthrough.

🔧 Subscribe for more suppressed tech builds
⚡ New experiments posted as completed

#HHO #StanleyMeyer #HydrogenGenerator

Видео Stanley Meyer's Transformer ACTUALLY Works - Live Test ⚡ канала The Off-Grid Alchemist