DJI Spark mid-air GPS failure and loss of control
Some footage from a flight a couple of days ago - the idea was to just hover a bit at about 50 meters altitude and take some overhead shots.
The Spark was brand new and had just been calibrated a couple of flights earlier, GPS signal was strong, home point was set, all batteries full and very short flying distance.
Still, something started to go seriously wrong after about 3 1/2 minutes of flight.
UPDATE SEPT. 2020: After trying all kinds of solutions and workarounds, it seems that degaussing the drone and then recalibrating the compass and IMU solved the problem. I used this inexpensive demagnetizer: https://s.click.aliexpress.com/e/_dVtoyFB
Видео DJI Spark mid-air GPS failure and loss of control канала E- Mat
The Spark was brand new and had just been calibrated a couple of flights earlier, GPS signal was strong, home point was set, all batteries full and very short flying distance.
Still, something started to go seriously wrong after about 3 1/2 minutes of flight.
UPDATE SEPT. 2020: After trying all kinds of solutions and workarounds, it seems that degaussing the drone and then recalibrating the compass and IMU solved the problem. I used this inexpensive demagnetizer: https://s.click.aliexpress.com/e/_dVtoyFB
Видео DJI Spark mid-air GPS failure and loss of control канала E- Mat
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
E14S - 3D printed Electric Unicycle (EUC)Meiko 17.6.20173D printed 5x7 back for Rittreck View CameraMielenilmaisu Malmilla 1.9.2017 - 12.003D printed lampshade made of glowing PLA filamentFun ride on my E14S 3D printed Electric UnicycleE15S - 3D printed Electric UnicycleChilling at the lakeside (3D VR180 4K)E14D - 3D printed Electric UnicycleeSnorkel70 - 3D printed hookah diving rig: construction & testTbilisi - Bridge of peaceKvariati Georgia, June 2018Making a Lithophane picture on a 3D printer - most simple wayRain or shine