1986 yz 80 engine component inspection and replace parts

In this video I pull apart the stator cover, the reeds, spark plug, install carburetor, and pull off the Clutch cover. I show how I pulled off the clutch, and kickstarter gear. I replaced various parts during this video like bolts, clamps, and gaskets. FOr more videos on the yz or my sons pw50 or my 2016 wr250r be sure to check out my channel, and don't forget to subscribe, Its much appreciated. Here is a list of part numbers I used in this video

Reed Gasket: 3JM-13621-00
Carb Clamps: 90460-43179 and 90436-51059
Spark Plug: BR10EIX
Water pump O rings: 93210-16772
Water pump gasket: 5X2-12428-10-00
Water pump drain crush washer: 90430-06166-00
Oil check level bolt: 95817-06008
Oil Check Level Crush washer: 90430-06016
Clutch Cover Gasket: 5X2-15462-10
Track Pack II Bolts

Part 1 of YZ80 Build: https://www.youtube.com/watch?v=vkM4CzGgd4A&t=155s

Part 2 of YZ80 Build: https://www.youtube.com/watch?v=ZkvvESksOFk&t=184s

Видео 1986 yz 80 engine component inspection and replace parts канала Bigair01