How To Replace A Crossmember or Subframe with Basic Tools Part 1
I have to admit, I thought this job would be quite difficult. The subframe (or crossmember) is quite large, there are a number of parts to remove and I'm working in a small 200 sq.ft. garage in the middle of winter. Surprisingly, it was quite straight forward and logical. Just take your time, label everything and you'll be successful!
► Subscribe: http://youtube.com/carsntoys
►► Tools and Supplies:
https://www.amazon.com/shop/carsntoys
►►► Our most helpful videos (One million + playlist): https://www.youtube.com/playlist?list=PLl6xt4Pyay3Cyh-cSJHj6ThrDT3kpd_HX
Parts removed / steps on driver and passenger side:
- Both front wheels and tires
- Rotor screws; if applicable
- Lower caliper bolt and safely suspend the caliper
- Caliper bracket
- Rotor
- Axle nut
- Steering tie rod
- Upper and lower ball joint
- Steering knuckle
- Front exhaust pipe
- Lower strut mount
- Lower control arm
- - - Install support bar - - -
- Bolts holding steering rack to subframe
- Transmission shift cable
- Engine and transmission mounts
- - - - Place floor jack under subframe with a large piece of wood - - -
- Remove subframe bolts and brackets
- Remove subframe by slowly lowering the floor jack
Music:
EDM Tropical House:
https://soundcloud.com/strix-shadowqinq/free-background-music-for-videos-no-copyright-instrumental-edm-tropical-house
Roman Muller - Maldives
https://soundcloud.com/freemusicforvlogs/roman-muller-maldives-free-music-for-vlogs
Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk.
Publication, reproduction or distribution of this film is strictly prohibited.
Carsntoys
http://youtube.com/carsntoys
#crossmember #subframe
Видео How To Replace A Crossmember or Subframe with Basic Tools Part 1 канала CarsNToys
► Subscribe: http://youtube.com/carsntoys
►► Tools and Supplies:
https://www.amazon.com/shop/carsntoys
►►► Our most helpful videos (One million + playlist): https://www.youtube.com/playlist?list=PLl6xt4Pyay3Cyh-cSJHj6ThrDT3kpd_HX
Parts removed / steps on driver and passenger side:
- Both front wheels and tires
- Rotor screws; if applicable
- Lower caliper bolt and safely suspend the caliper
- Caliper bracket
- Rotor
- Axle nut
- Steering tie rod
- Upper and lower ball joint
- Steering knuckle
- Front exhaust pipe
- Lower strut mount
- Lower control arm
- - - Install support bar - - -
- Bolts holding steering rack to subframe
- Transmission shift cable
- Engine and transmission mounts
- - - - Place floor jack under subframe with a large piece of wood - - -
- Remove subframe bolts and brackets
- Remove subframe by slowly lowering the floor jack
Music:
EDM Tropical House:
https://soundcloud.com/strix-shadowqinq/free-background-music-for-videos-no-copyright-instrumental-edm-tropical-house
Roman Muller - Maldives
https://soundcloud.com/freemusicforvlogs/roman-muller-maldives-free-music-for-vlogs
Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk.
Publication, reproduction or distribution of this film is strictly prohibited.
Carsntoys
http://youtube.com/carsntoys
#crossmember #subframe
Видео How To Replace A Crossmember or Subframe with Basic Tools Part 1 канала CarsNToys
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How To Install An Engine Support Bar | OEMTOOLS 3 Point Support Bar](https://i.ytimg.com/vi/lErjnB2Y4GM/default.jpg)
![Reasonable DIY rust repair on a vehicle subframe, unibody, or frame.](https://i.ytimg.com/vi/_uKJLE6dwRQ/default.jpg)
![HOW TO DROP A SUBFRAME ON AN E CHASSIS BMW! (E6X, E8X, E9X)](https://i.ytimg.com/vi/9UD6KBOXAqE/default.jpg)
![Nissan Note subframe bushes](https://i.ytimg.com/vi/sXCCR2RiRzM/default.jpg)
![How to Replace Control arms, Tie Rods and Stabilizer Links](https://i.ytimg.com/vi/lxz3Rdeydko/default.jpg)
![](https://i.ytimg.com/vi/Qa15fCYRFx8/default.jpg)
![Front Subframe Full Restoration - INCREDIBLE RESULTS!!](https://i.ytimg.com/vi/0NJwb3EMXOk/default.jpg)
![How To Install A Crossmember or Subframe with Basic Tools Part 2](https://i.ytimg.com/vi/zVXb1dQwEdk/default.jpg)
![How A Motorcycle Transmission Works](https://i.ytimg.com/vi/h9MkzOkaHd4/default.jpg)
![Nissan Sentra remove and replace subframe bushings](https://i.ytimg.com/vi/02pyU2JahF0/default.jpg)
![How to Replace Rear Subframe Assembly 00-08 Ford Focus](https://i.ytimg.com/vi/efhWBx3cF1k/default.jpg)
![How To Remove a Bolt Seized in a Bushing Sleeve](https://i.ytimg.com/vi/37iB11GUIC4/default.jpg)
![Replacing a subframe engine cradle on 2004 - 2006 Chrysler Pacifica 2WD 3.5L](https://i.ytimg.com/vi/l0rPPRoZIPA/default.jpg)
![Rust Disaster Rear Subframe Swap - Project Grip S14](https://i.ytimg.com/vi/QBD5FtQodkc/default.jpg)
![Dodge Caliber SubFrame Replace](https://i.ytimg.com/vi/teXCCjE-m_U/default.jpg)
![How To #3. Front subframe removal and installation.](https://i.ytimg.com/vi/EC_Gyut15Bg/default.jpg)
![Refinish An Ugly Subframe](https://i.ytimg.com/vi/pUa4TbqhljI/default.jpg)
![Subframe Failure (In Action) - A Serious Warning!](https://i.ytimg.com/vi/kXGVM3jBGqU/default.jpg)
![How To Test And Replace Heated Oxygen Sensor P0141](https://i.ytimg.com/vi/ZqkfeBD9VYw/default.jpg)
![Nissan Suspension Banging Noise](https://i.ytimg.com/vi/C7MAXjHLWUw/default.jpg)