3 FlashForge AD5X Build Plates Tested | Stop Using Glue JUUPINE OMG GECO plates

In this video I test 3 different build plates on the FlashForge AD5X and focus on one thing that matters most, first layer adhesion. I run the same simple test print on each plate, compare how well they grip, how easy they release, and what the bottom finish looks like.

I also cover two common 3D printing myths. First, do you really need a glue stick for reliable prints. I show that if your first layer settings are dialled in and the plate is clean, glue is often not needed at all. Second, the idea that touching the plate with your fingers will ruin built adhesion. I do a real world touch test and show what actually happens.

If you are using the AD5X and not sure which plate to use, or you are fed up of fighting first layers, this should help you get consistent results without the mess.

For all the parts tested in this video use this link to get more info
OMG cool plate
GECO no heat plate
https://s.click.aliexpress.com/e/_EHyZBSU

STL file for testing here : https://makerworld.com/en/models/28632-bambu-test-bed-adhesion#profileId-25018

Chapters
00:00 Intro
01:31 My AD5X setup
04:05 What I print the most PEGT
07:09 The first layer adhesion test file STL
08:13 Flash Forge PEI texture plate with PLA
09:14 JUUPINE OMG cool plate with PLA
12:50 GECO no heat PLA only plate with PLA
19:41 GECO no heat PLA only plate with PETG
22:42 Flash Forge PEI texture plate with PETG
23:55 My conclusions
👉Tap the link https://s.click.aliexpress.com/e/_EHyZBSU or enter the search code [AY1JU8] on the AliExpress homepage to see all the amazing items I've handpicked for you. And don't forget to enjoy extra savings with the exclusive discount codes below, just for fans like you!
🌟 Remember, these codes can be used on almost all items in selected countries on AliExpress, except for mobile phones.

Click my link to explore amazing products on AliExpress and use my codes for additional discounts!
😍 The codes apply to affiliate products, including mobile phones.

Discount Codes:
$3 off on orders over $29:【IFPJHHOR】
$6 off on orders over $59:【IFPEXKIT】
$9 off on orders over $89:【IFPFLEO8】
$16 off on orders over $149:【IFPN1MVL】
$23 off on orders over $199:【IFPRZTHL】
$30 off on orders over $269:【IFPJDHHI】
$40 off on orders over $369:【IFPKTYDR】
$50 off on orders over $469:【IFPF8AIV】
$60 off on orders over $599:【IFPDBROU】
$70 off on orders over $699:【IFPTJ3M1】

#aliexpresshaul #flashforge #3dprinting

Видео 3 FlashForge AD5X Build Plates Tested | Stop Using Glue JUUPINE OMG GECO plates канала Benson Chik