How To Plane a Bridgeport Mill Table: Part 1
Using my 1943 Rock Ford Metal Planer to restore a Bridgeport Mill I am rebuilding.. Show you the setup and planning the top in this part.. Part 2 will have planning the dovetails.
Видео How To Plane a Bridgeport Mill Table: Part 1 канала Steve Watkins at Work
Видео How To Plane a Bridgeport Mill Table: Part 1 канала Steve Watkins at Work
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Should I have bought a Miller Welder?Bad Tank On A John Dow Industries 20-Gallon Fluid EvacuatorA Visit To A Great Machine Rebuilder : 4GSR Of Practical Machinist Forum FameSomeone Screwed UP The Screw!Making Axelson Gib Screw : Part 1This Should Be A Crime: Part 2 Will the Motor run?Restoring Old Machines: DoAll 10 x 30 Grinder , Will IT work?Restoring Machine Tools : This Should be a CRIME!Cincinnati Shaper Restoration : The Nut Is InstalledRestoring a Shaper: Fitting the nut.Rebuilding Old Machines : Cutting The BaseRestoring Old Machines: This Nut turned out niceRepairing Old Machine Tools: Multi Start Lead ScrewOld Machines Restoring Old Machines : Three Project UpdatesOld Machines Restoring Old Machines : "Well That's Not Good"Old Tools Restoring Old Tools : Multi-Start Leadscrew NutOld Tools Restoring Old Tools : Shaper Multi-Start Leadscrew Nut RepairRethreading the Shaper Feed Nut...EASY WAY to refurbish any metal table : Leveling the DoAll 14" GrinderWorking on the DoAll grinder 14 inch Surface Grinder: Don's Shop updateMoving Into A Dedicated Grinding Room : Plus a couple of machines for sale. grinders