How to make a paper kite?कागज की पतंग कैसे बनाते हैं?

How to make a paper kite?कागज की पतंग कैसे बनाते हैं?
Do you wrap thread around the kite while folding paper?
Do you need thread to make a kite?
Do you also need fine straw in a leaf while making a kite?How to make a kite?
What materials are needed to make a kite?
Does a kite have a bow?
Does a kite have a skewer?
Does a kite have a skewer?
Does kite paper need to be made?
Does one need a one-inch tape measure?
Does one need scissors to cut the kite paper?
Does one need a pen or chalk to mark the kite?
Does one need glue or glue to stick the kite's skewer to the paper?
Does one need a knife or scraper to peel the skewer?
Do you need wood to roast the kite's string?
A kite's string is roasted in the smoke of a burning tire in a canister?
Do you need a 3-foot square counter to make a kite?

Do you need fine straw of 1 suit to make a kite?
A frame is also needed to make a kite?
Do you also need a frame to make a kite?
What is the size of the frame of a quarter kite?
1/The frame of a quarter kite is 26 half inches long. Is there 1 or 2 suits less in 23?
2/The frame of a half kite is 24 half inches long. 21 half inches long?
3/ What is the size of the strings of a medium-sized kite, 21.75 inches, and 23.5 inches of the bow?

1/ After cutting the string from the kite's string, peel the string, apply glue to the string, and stick it in the middle of the paper, and push the string onto the entire paper with a cloth.

2/ Cut the kite's string 3 inches from the measurement of the string on the paper, then extend it by 1.5 inches, apply glue to the same paper, and stick the string on.

3/ Place two stitches at an angle of 8 inches from the corner of the string towards the point.

4/ Thread the string from the bottom of the kite, and wrap the last thread at the same place.
1. When peeling the kite's tail, do not cut the 8-inch section from the center. It should be thin on both sides and thick in the middle. The tail should be even after peeling. After peeling, it should look round and look good. All this should be done after frying.

2. Should the tail of the kite be thin on one side of the tail and thick on the other side of the tail, as per your requirement?

3. Should the tail of the kite be wrapped tightly to one side?

5. After attaching the kite's thread, apply glue to the edges up to two inches, tuck the thread inside, and fold the paper two inches.

6/Put a chip of a billist on the top side of the leaf. Put a chip of 0.5 inch in the middle of the beam. Put a chip on the upper end of the kite. Put a chip of 0.5 inch at a distance of 8 inches from the corner of the beam. Put a leaf on the bottom where the ear is tied. On the opposite side, on the 2 suits of the side, stick a straw torn from the leaf of the required size, then stick the leaf on top. Then apply glue in the space between the back and the corner of the beam and stick it properly. Is the kite ready?

पतंग कैसे बनाते हैं ?
पतंग बनाने में क्या सामान चाहिए ?
पतंग की कमानी लगती है ?
पतंग में काँप थड्डा लगता है ?
पतंग मदिन पतंग का पेपर चाहिए ?
पतंग की नाप के लिए एक इंची टेप चाहिए ?
पतंग का कागज़ काटने के लिए एक कैंची चाहिए ?
पतंग काटने के लिए निशांन लगाने के लिए पेन या चक मिटटी चाहिए?
पतंग का काँप थड्डा कागज़ पे चपकने के लिए गुलु या ले ई चाहिए?
काँप थड्डा छिलने के लिए छुरी या स्केरापर चाहिए ?

#Kite Flying
#Kite Making
#Kite Flying #Kite Snatching #Kite Zia Style

Видео How to make a paper kite?कागज की पतंग कैसे बनाते हैं? канала ZIA STAYEL