How To True Up a Metal Lathe Face Plate
I true up the new face plate for my large Metal Lathe. The face plate is made of cast iron and seems to have never been used. The run-out is not to bad but needs to be setup for my lathe and to turn true on my lathe. So it is important to face it off on my lathe so it is usable. This is something that is very doable in the home shop.
🎯Subscribe: https://www.youtube.com/user/Catfish6945?sub_confirmation=1
🎯To support the channel Pick up a Dovetail Cutter and Scribe.
Info: Email To: RRINTHESHOP@GMAIL.COM
🎯Follow me On Instagram: https://instagram.com/rrintheshop/
#metallathe#faceplate#trueupfaceplate
Видео How To True Up a Metal Lathe Face Plate канала Randy Richard In The Shop
🎯Subscribe: https://www.youtube.com/user/Catfish6945?sub_confirmation=1
🎯To support the channel Pick up a Dovetail Cutter and Scribe.
Info: Email To: RRINTHESHOP@GMAIL.COM
🎯Follow me On Instagram: https://instagram.com/rrintheshop/
#metallathe#faceplate#trueupfaceplate
Видео How To True Up a Metal Lathe Face Plate канала Randy Richard In The Shop
Показать
Комментарии отсутствуют
Информация о видео
20 декабря 2014 г. 21:20:17
00:17:36
Другие видео канала
![Lathe Face Plate Work](https://i.ytimg.com/vi/EIGSFJTqi2g/default.jpg)
![Work and Tool Holding in the Metal Lathe](https://i.ytimg.com/vi/xEXXoT9asME/default.jpg)
![Face plate set up and machining](https://i.ytimg.com/vi/3XD7dJ4-2SU/default.jpg)
![Как сделать планшайбу для токарного станка ТВ-4 / How to make the faceplate for the lathe](https://i.ytimg.com/vi/KmrzUvXTn6E/default.jpg)
![Turn your lathe faceplate into a large fly cutter](https://i.ytimg.com/vi/drKe0tp1JpY/default.jpg)
![Machining a lathe face plate from a home foundry iron casting](https://i.ytimg.com/vi/81YGImT-mkI/default.jpg)
![](https://i.ytimg.com/vi/TUXEhZ_ur6A/default.jpg)
![Mechine Technology III lesson 11 Machining Offset Holes Face Plate and the 4 Jaw Chuck](https://i.ytimg.com/vi/Ba8Vva3BJ_Y/default.jpg)
![Headstock spindle for DIY metal lathe - part 4](https://i.ytimg.com/vi/CFrLxt86B24/default.jpg)
![3 Ways Mount Wood To Lathe - Bowl Woodturning Video](https://i.ytimg.com/vi/wW4_XtSLbhE/default.jpg)
![Face plate clamps! Let's make 'em!](https://i.ytimg.com/vi/pTCAGaJ5hoo/default.jpg)
![Lathe Face Plate Pallet](https://i.ytimg.com/vi/WxDM615U9a0/default.jpg)
![Quality Tool Making Using Recycled Junk! - Part 1- MSFN](https://i.ytimg.com/vi/K2eF3rhKon4/default.jpg)
![Making a Faceplate for a South Bend 9" Lathe](https://i.ytimg.com/vi/JsX9Zn1AhJQ/default.jpg)
![Threading Metric Titanium Rod](https://i.ytimg.com/vi/CbZukAVi8hU/default.jpg)
![Get Your Steady Rest Aligned](https://i.ytimg.com/vi/MkSJilGKB_A/default.jpg)
![How to use a D-Bit Grinder - The Basics!](https://i.ytimg.com/vi/VLRg24LrcJw/default.jpg)
![Get your parts to run true in a non adjustable chuck. YOU MUST WATCH THIS!](https://i.ytimg.com/vi/gCUkJydSmdA/default.jpg)
![Fixing the mini lathe - episode 11 - cross slide gib](https://i.ytimg.com/vi/1tqLHFMwqx0/default.jpg)
![Surface Plate Indicator Stand](https://i.ytimg.com/vi/dakw2qwusCI/default.jpg)