Home Aluminium Anodising Process - Part 1

This is part 1 of 2
I have Updated Description April 30, 2021
Explaining how I anodise machined aluminium items.
In this I explain how I clean, prepare anodise and seal some aluminium parts providing a natural finish.
- Part 2 of the video is specific to how I colour dying the the aluminum following the actual anodising process.
I have been home anodising aluminium now for 10+ years. I don't propose to be an expert but do achieve some very satisfying results.

During the video I refer to the company Caswell where I purchase various supplies such as the anodising dye/colour that I use.
Their URL is: https://www.caswellplating.com/
UPDATE:
These days I use titanium tubes to hang the parts, those are the ones that the +Ve clips are connected to. Also as most of the parts being anodised have an M3 or M4 threaded hole somewhere I use short titanium m3 or M4 button head screws to secure the titanium wire. I put a loop on one end of the wire that the screw passes through -----O, this provides a really secure electrical connection and as Titanium is not effected by the acid or the process they can be used over and over again indefinitely just like the titanium wire. I bought the screws and tube on eBay.

Видео Home Aluminium Anodising Process - Part 1 канала hamrx8