Map Sensor P0107 and P0108 | How to Test and Replace

A map sensor measures barometric pressure. This pressure is then converted into an electrical signal for the ECM. Unfortunately, you'll need a very sophisticated scan tool to measure the barometric pressure via kilopascals (kpa). However, you can test the sensor via the amount of volts at idle. We show you how to do so.

Specs for this vehicle:
Volts at idle: 1.4 - 1.8v (or 20-47kpa)
P0107: Volts under or equal to .6v (or 13kpa)
P0108: Volts at or above 4.4v (or 120kpa)

► Subscribe: http://youtube.com/carsntoys
►►Helpful Tools: https://www.amazon.com/shop/carsntoys
Tools Used:
Safety Glasses
Digital multi meter (Craftsman)

Note:
This video is being performed by an experienced tech. Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, use safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. If you don't think you can perform the job then be smart and don't. Carsntoys is a member of the Amazon Influencer Program.

Publication, reproduction or distribution of this film is strictly prohibited.

How to Test and Replace A Map Sensor P0107 and P0108
https://youtu.be/QSR6pIXzvl0

Carsntoys
http://youtube.com/carsntoys

Видео Map Sensor P0107 and P0108 | How to Test and Replace канала CarsNToys