How to Assemble AN, Push Loc, PTFE, Crimp Style Fittings and Hose!
We get a ton of questions about the difference between PTFE , Standard Braided AN, Push Loc, and Crimp style Hose and Fittings. So we figured we would make a video detailing the difference in assembly, fitting style, line style and more.
Standard Braided AN Line / Hose: Must use Crimp or AN two piece wedge style hose ends. This uses a wedge to lock the hose together with the fitting. Must use rubber inside braided style AN line. Available 4AN 6AN 8AN 10AN 12AN 16AN 20AN and larger in some cases.
PTFE style line 6:30: Must use PTFE style fittings with inner Olive / Ferrule. PTFE line should be conductive style to avoid arcing if used with fuel. PTFE line is much smaller OD than standard braided AN line and can not be used interchangably.
Pushloc 3:10 : Interference barb press on style hose. Not allowed in some classes. Check local rules for usage and legality.
Standard AN braided 13:38
Standard AN braided crimp: 17:00
Shop Fittings and Hose at Motion Raceworks by clicking https://www.motionraceworks.com/collections/fittings-hoses
Shop Motion Raceworks
www.motionraceworks.com
FOLLOW US:
Website: https://www.motionraceworks.com/
Facebook: https://www.facebook.com/MotionRaceworks/
Instagram: https://www.instagram.com/motionraceworks/
TikTok: https://vm.tiktok.com/JjuVejc/
Видео How to Assemble AN, Push Loc, PTFE, Crimp Style Fittings and Hose! канала Motion Raceworks Official
Standard Braided AN Line / Hose: Must use Crimp or AN two piece wedge style hose ends. This uses a wedge to lock the hose together with the fitting. Must use rubber inside braided style AN line. Available 4AN 6AN 8AN 10AN 12AN 16AN 20AN and larger in some cases.
PTFE style line 6:30: Must use PTFE style fittings with inner Olive / Ferrule. PTFE line should be conductive style to avoid arcing if used with fuel. PTFE line is much smaller OD than standard braided AN line and can not be used interchangably.
Pushloc 3:10 : Interference barb press on style hose. Not allowed in some classes. Check local rules for usage and legality.
Standard AN braided 13:38
Standard AN braided crimp: 17:00
Shop Fittings and Hose at Motion Raceworks by clicking https://www.motionraceworks.com/collections/fittings-hoses
Shop Motion Raceworks
www.motionraceworks.com
FOLLOW US:
Website: https://www.motionraceworks.com/
Facebook: https://www.facebook.com/MotionRaceworks/
Instagram: https://www.instagram.com/motionraceworks/
TikTok: https://vm.tiktok.com/JjuVejc/
Видео How to Assemble AN, Push Loc, PTFE, Crimp Style Fittings and Hose! канала Motion Raceworks Official
Показать
Комментарии отсутствуют
Информация о видео
10 августа 2020 г. 16:50:45
00:21:50
Другие видео канала
PTFE VS AN - Steel Braided vs Nylon Hose Motion 360Twin Turbo GTO Fab Day! Plus the Blazer is headed for the chassis shop for upgrades!GTO Project Turns The Corner: Getting Ready For Final Assembly and Wiring!Nova Makes First Passes at the Track in Almost 2 Years! Fastest 1/8 Mile EVER!EFI and Boost Fuel Pressure Regulators: Motion360Tech Tip Tuesday: How to Power Electric Cooling Fans... Must See!How to Properly Setup a Catch Can | Motion 360Doug’s Gen V LT Nova makes HUGE horsepower! Dyno day at Redline Motorsports Bloomington, IL!Holley Terminator X + RIFE LS coolant temp / pressure sensor installManual Low Pressure Hose Crimping Machine1600HP AWD Escalade and Al Unser Jr old Bus! Living the Racecar DreamExhaust Trim Ring Install Technique, Get it Right EVERYTIME: Tech Tip TuesdayAN Fittings & Hoses Guide & How ToASSEMBLE A-N PTFE FITTINGS-THIS WORKS FOR MEHow to install AN fittings.Soldering Ball ValvesHow to Setup and Tune a Boost Controller for Fast 60ft times: Tech Tip TuesdayBraided Hose Assembly with AN Fittings - Summit Racing Quick FlicksTech Tip Tuesday: Steering Shaft and U Joint building