Peugeot Citroën blank/virginized (new) BSI programming. Includes key/immobiliser programming.

Consider to support my channel and all the hard work put into it at http://www.patreon.com/LMAutoRepairs
Thank you

Hi

PLEASE READ THE ENTIRE DESCRIPTION!

In this video I take you through the programming of a virginized/ reset/blanked Peugeot 307 BSI.
This same procedure applies to other models and variants of Peugeot and Citroën cars.
This is also the same procedure for a new BSI, even if supplied by Peugeot or Citroën.
In this case the BSI was second hand, which I have reset/virginized or whatever you want to call it.
Below is the link that will take you to the video where I demonstrate how to reset/virginize one of this BSI.

Reset/Virginize BSI:

https://youtu.be/nXoUz-ejRtI
IMPORTANT NOTE:
1. This car is the car I have cloned the BSI on a video that I have made some time ago...
Clone did not worked, so they brought it back and I have then reset/virginized the BSI.
The car then ended up on my drive way because they did not new (or did not have the equipment), to reprogram/recode the BSI.
So yes, is the same BSI on the video from the above link.

2. I never mention on this video, but best is to programme the same keys with the same transponders... Otherwise you will lose the remote function.
That is due to the remotes being linked to the original transponders.
I used 2 new transponders, they start the engine but they didn't had the remote set, so no remote can be synchronised.
In the end, when I got the other key, I went through the key learning procedure again and programmed 3 keys... the two I show on the video, and the one that was not in my possession at the time.
After that the remote from this last key synchronised with no problem.

3. I was doing this at the time of the recording and with no instructions...
So not always I went straight to the right button.
I have although, ensure I would explain all the steps I made through the entire process, even when was not recording...
So if you watch the entire video, will be no reason why you shouldn't be able to do this on you own without any problems...

Hope you enjoy the video and find it helpful.
Any comments, suggestions or questions, please put them below.
Like always, thank you for watching!

Видео Peugeot Citroën blank/virginized (new) BSI programming. Includes key/immobiliser programming. канала LM Auto Repairs