Pfaff Zick Zack Rad gängig machen ~ Its all about the Wheel and how to get it working again!

Hi
Hier im Video zeig ich Dir wie Du das Zickzack Rad wieder gängig machen kannst wenn es total verharzt ist.

Hey You
Here in the clip i show you how you can make the Ziggzagg wheel working again when it is stuck as heck and won't move. But theres more! Read further!

thats the link for the english version!

https://youtu.be/vGq3qwWmirc

You can do this too: (thats the not-take-apart-anything-solution)
i did repair about 2 dozen machines with that methode so its a proofen thing. When the gunk wont get unstuck you have to take the stuck parts apart but do yourself a favor and film what you do so you know where what goes.

The basic idea is to get some petroleum/diesel. Drip some on the joints and wiggle them until they are lose.
When they are realy tight use a hairdryer to warm up the wax/gunk that is blocking the free movment of the joints.
So warm the machine up, drop some petroleum/diesel on the joint. Then wiggle/move the parts interlocking in the joint and then oil them properly.
Thats it.
BTW: Do that outside! Warm petroleum smells like the devilsass!

Why is wax/resin/gunk there man?! Because to store unsold machines, they did spray and drop a rust inhibitor wax on the machine and in the joints. The ReSeller had to clean the machine with Petroleum or Diesel and oil them properly BEFORE a sale.
Ask yourself how many clerks, did clean a machine before selling? Allmost none! Lazy bastards they have been.

Good luck

Видео Pfaff Zick Zack Rad gängig machen ~ Its all about the Wheel and how to get it working again! канала Martin Hansson /Vögeli