Pillar Bench Drill Press Drum Sander With dust extraction/DIY

Check out my new Video https://youtu.be/ZAKg9iHA1Q8
In this video I'll be making a DIY pillar bench drill press drum sander with dust extraction. I used 13 mm ply for the base and 19 mm mdf to make the sander drums.The pillar drill drum sander table just bolts directly onto the bench drill table making it very secure. and the size on the table is 500 mm long and 300 mm deep. The height of the table is 100 mm. And is made of 13 mm ply.

I also installed a bearing so that the bench drill bearing wouldn't wear out By in stalling a small block of wood and press fitting a bearing into it.

Because I never had the correct size hole saw for the dust extraction hose I made some disks to act as an adapter.

If you liked the video Please consider SUBSCRIBING for new videos being uploaded weekly. Don't forget to give me a big thumbs up and leave me a comment in the section below.

Iike always there is a free Sketchup file download available at my website link below.

http://www.shopmad.co.uk/index.php/build-plans/bench-drill-press-drum/

Thanks for watching
Anthony

Видео Pillar Bench Drill Press Drum Sander With dust extraction/DIY канала Anth Wood