How to Make a Chef Knife Handle ! Chef Knife Makeover 2/4
Easy Custom Chef Knife Handle with OAK wood scales and BRASS pins. To Episode 1 : https://www.youtube.com/watch?v=fk16UnauSfw . From Series : "Chef knife Makeover" ! aka How to customize your chef knife and finally make it yours !!! no stones were left unturned : New design, new shape, new handle, new edge and of course new style. To catch a specific episode :
https://www.youtube.com/playlist?list=PLURsDaOr8hWV6nU0ca570U3jdzyVrK0QS
Disassembling
-----------------------
Disassembling the chef knife handle using a leverage action.
It's a statement for all cheap knives : Blade can be decent but the handle will always suck.
Sanding
-------------
Clean the blade with fine sanding paper, let’s also get rid of those writings
Drilling
-----------
I used 5mm brass rod for the pins. I needed to Drill bigger holes using a Cobalt Metal Drill bit 5.5 mm, and a drill press would have been a plus.
Tempering
-----------------
• Remove temper from a Blade is done by heating the blade to a precise temperature and by letting it cool down slowly. it makes the blade softer.
• Adding a temper to a blade is done by heating the blade to a precise temperature and by cooling it down brutally. it makes the blade harder.
EPOXY GLUEING
-------------------------
Epoxy glue sets up in less than 5 minutes which is more than enough if you are prepared, but definitely too short to get any problems during action. Wear a mask, and gloves.
SHAPING THE HANDLE
--------------------------------------
Using an electric file, customize the handle to perfectly fit your hand and your needs.
like : I made a slightly bigger handle, with an angled knife-butt to give it a sharper look.
FINISHING
-----------------
Give it a quick sanding action. And then apply
and then finish it with a coating of oil.
Did you noticed ? I am wearing my own CLOTHING BRAND ! Pizza Shirt and Power-drill guns in the kitchen :) Buy them and support the French Guy's adventures on : http://www.dftba.com/frenchguycooking
OR I might be wearing my favorite French clothes from Saint-James. Check them out on Saint-James.fr ! Cock-a-doodle-doo ! Cocorico !! http://www.saint-james.fr
Facebook :
http://www.facebook.com/frenchguycooking for mouth watering photos and good discussions ;)
Instagram :
http://instagram.com/frenchguycooking
Twitter :
http://www.twitter.com/frenchguycookin
I am thinking of making an über cool cookbook, so if you are interested, drop me a line there : http://www.frenchguycooking.com/the-cookbook-project
Lots of love,
Alex
Видео How to Make a Chef Knife Handle ! Chef Knife Makeover 2/4 канала Alex
https://www.youtube.com/playlist?list=PLURsDaOr8hWV6nU0ca570U3jdzyVrK0QS
Disassembling
-----------------------
Disassembling the chef knife handle using a leverage action.
It's a statement for all cheap knives : Blade can be decent but the handle will always suck.
Sanding
-------------
Clean the blade with fine sanding paper, let’s also get rid of those writings
Drilling
-----------
I used 5mm brass rod for the pins. I needed to Drill bigger holes using a Cobalt Metal Drill bit 5.5 mm, and a drill press would have been a plus.
Tempering
-----------------
• Remove temper from a Blade is done by heating the blade to a precise temperature and by letting it cool down slowly. it makes the blade softer.
• Adding a temper to a blade is done by heating the blade to a precise temperature and by cooling it down brutally. it makes the blade harder.
EPOXY GLUEING
-------------------------
Epoxy glue sets up in less than 5 minutes which is more than enough if you are prepared, but definitely too short to get any problems during action. Wear a mask, and gloves.
SHAPING THE HANDLE
--------------------------------------
Using an electric file, customize the handle to perfectly fit your hand and your needs.
like : I made a slightly bigger handle, with an angled knife-butt to give it a sharper look.
FINISHING
-----------------
Give it a quick sanding action. And then apply
and then finish it with a coating of oil.
Did you noticed ? I am wearing my own CLOTHING BRAND ! Pizza Shirt and Power-drill guns in the kitchen :) Buy them and support the French Guy's adventures on : http://www.dftba.com/frenchguycooking
OR I might be wearing my favorite French clothes from Saint-James. Check them out on Saint-James.fr ! Cock-a-doodle-doo ! Cocorico !! http://www.saint-james.fr
Facebook :
http://www.facebook.com/frenchguycooking for mouth watering photos and good discussions ;)
Instagram :
http://instagram.com/frenchguycooking
Twitter :
http://www.twitter.com/frenchguycookin
I am thinking of making an über cool cookbook, so if you are interested, drop me a line there : http://www.frenchguycooking.com/the-cookbook-project
Lots of love,
Alex
Видео How to Make a Chef Knife Handle ! Chef Knife Makeover 2/4 канала Alex
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Tattoo a Chef Knife Blade with Metal Etching ! Chef Knife Makeover 3/4How to Make Knife Handles - Beginner's Guide 2019How to make knife handles (from Brass and Ebony)The Best Way To Sharpen & Clean Knives (And The Worst) | EpicuriousKnifemaker Explains The Difference Between Chef's Knives | EpicuriousKnife Handles 101! - How to Make Knife HandlesHow to Re Design a Chef Knife ! Chef Knife Makeover 1/4Replace the handle on your broken kitchen knifeHow to Sharpen a Chef Knife ! Chef Knife Makeover 4/4HOW TO REPLACE BROKEN KNIFE HANDLE?/#DaddysHomeThe SECRET to sharpening a SERRATED BLADE is SANDPAPER and a SCREWDRIVER! no special tools required!100 Drawer Workshop Organiser Made From Recycled Pallets. Over 1000 Separate Pieces.Professional Chefs Show Us Their Knives | Test Kitchen Talks | Bon Appétit$5 Rusty Japanese Knife RestorationVintage Chef's Knife RestorationMake A Knife With Cheap & Basic Amazon Tools | Knife MakingWUSTHOF KNIFE HANDLE REPAIR - Replacement Chef KnifeReplacing a knife handle (complete novice)How to Attach Knife Handles - Beginner's Guide for Noobs