DIY LED Lamp
I designed this LED lamp for my 3D printer with the help of Fusion 360.
I rebuilt the lamp with 510 ohm resistors. The temperature is much lower this way. Please use 510 ohm or higher resistors. If you can find the datasheet of the LEDs check the maximum current and choose the resistor value accordingly. If you have any questions, please leave a comment.
Видео DIY LED Lamp канала Istvan Beszteri
I rebuilt the lamp with 510 ohm resistors. The temperature is much lower this way. Please use 510 ohm or higher resistors. If you can find the datasheet of the LEDs check the maximum current and choose the resistor value accordingly. If you have any questions, please leave a comment.
Видео DIY LED Lamp канала Istvan Beszteri
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
LM8UU Replacement Modeling in Fusion 360User Parameters in Fusion 360DIY Bed Leveling Sensor Build - Part 2DIY Bed Leveling Sensor Build - Part 33D Printed Fishing Bait - Blender SculptingModify STL in Fusion 3602020 Aluminium Extrusion Modelling in Fusion 360Linear Bearings on 3D printersDIY Bed Leveling SensorDIY Bed Leveling Sensor Build - Part 1Modify Holes of an STL Model3D Printed Custom Key