Arduino based keyer build for Morse Code (CW)
Please excuse the noise. I had the doors opened and the fan running. Great weather out today!.
I used Ernest, PA3HCM's plans to build a CW keyer out of an arduino (I used a nano model). It looks a little sloppy but works well. I may design a board to use for this project and a 3D case to enclose it.
Link to PA3HCM's post on this.
http://www.pa3hcm.nl/?p=1010
Видео Arduino based keyer build for Morse Code (CW) канала WI9LL
I used Ernest, PA3HCM's plans to build a CW keyer out of an arduino (I used a nano model). It looks a little sloppy but works well. I may design a board to use for this project and a 3D case to enclose it.
Link to PA3HCM's post on this.
http://www.pa3hcm.nl/?p=1010
Видео Arduino based keyer build for Morse Code (CW) канала WI9LL
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Matching a lower band on a standard half wave dipole with the aid of a tuner.Field Day 2017 JT65 QRP Battery powered.20m WSPR Test on Tiny End Fed AntennaYaesu FT-817 QRP through a Mag Mounted Ham Stick!Compact Homebrew End Fed QRP AntennaYaesu FT-817 QRP with homebrew End FedA song from 66 in the 66