Machining Parts for the Apollo 11 Anniversary: Project Egress!! | WW258
Apollo 11. Smithsonian National Air and Space Museum. 50th Anniversary. Adam Savage. Project Egress---need I say more!? Join us for this exciting journey we weren't sure we could make! We were given an amazing opportunity to collaborate with other makers and Adam Savage's team to make an Apollo 11 hatch door replica for the 50th anniversary of the lunar landing. Not only was this a great challenge for our team, it was a way to pay it forward and commemorate important aerospace history! Parts from various talented makers will be assembled by Adam and his team on July 18th, 2019 at the Smithsonian National Air and Space Museum in Washington, D.C. If you're interested in attending this FREE event, check out the link in the description below. We hope to see you there!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Links for this video:
Smithsonian National Air and Space Museum
"Project Egress" Build
https://s.si.edu/2LJdGPj
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Copyright Disclaimers and Attribution:
**THE APPEARANCE OF NASA PHOTOS, VIDEO, OR AUDIO RECORDINGS DO NOT IMPLY OR CONSTITUTE NASA ENDORSEMENT. **
Copyright Disclaimer under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research.
Apollo 11 command module hatch, National Air and Space Museum, Washington, D.C.
(https://commons.wikimedia.org/wiki/File:Apollo_11_command_module_hatch.jpg)
by Mike Peel (http://www.mikepeel.net/), licensed under CC BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0/)
Famous speech from Neil Armstrong: At 2:56 UTC on , Armstrong made his descent to the Moon's surface and spoke his famous line "That's one small step for [a] man, one giant leap for mankind" exactly six and a half hours after landing.
(https://commons.wikimedia.org/wiki/File:Frase_de_Neil_Armstrong.ogg)
by NASA [Public Domain]
Sound of the Apollo 11 Landing on the Moon
(https://commons.wikimedia.org/wiki/File:Pouso_da_Apollo_11_na_Lua.ogg#filehistory)
by NASA [Public Domain]
Apollo 1 Prime Crew (https://commons.wikimedia.org/wiki/File:Apollo_1_Prime_Crew_-_GPN-2000-001159.jpg) by NASA [Public Domain]
Apollo 11 Launch HD SILENT
(https://images.nasa.gov/details-NHQ_07_16_1969_Apollo%2011%20Launch%20HD%20_No%20Audio%20.html) by NASA [Public Domain]
ID: NHQ_07_16_1969_Apollo 11 Launch HD _No Audio
Main Countdown Launch " We have a liftoff"
(https://www.nasa.gov/62282main_countdown_launch.wav)
by NASA [Public Domain]
Hatch, Crew, Apollo 11
(https://airandspace.si.edu/collection-objects/hatch-crew-apollo-11) by
Rockwell International Corporation
DATA SOURCE: National Air and Space Museum
Unified Hatch
(https://airandspace.si.edu/collection-objects/hatch-crew-apollo-11) by
Rockwell International Corporation
DATA SOURCE: National Air and Space Museum
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reach us / CNC Info:
Speeds & Feeds: https://provencut.com
Download Fusion 360: https://www.dpbolvw.net/click-9255839-12529306
Online Fusion 360 Training: http://bit.ly/LearnFusion360
Hands-On CNC Classes: https://www.nyccnc.com/events
SMW Products: https://saundersmachineworks.com/
CNC Resources: https://www.nyccnc.com 5 Reasons to Use a Fixture Plate on Your CNC Machine: https://bit.ly/3sNA4uH
Видео Machining Parts for the Apollo 11 Anniversary: Project Egress!! | WW258 канала NYC CNC
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Links for this video:
Smithsonian National Air and Space Museum
"Project Egress" Build
https://s.si.edu/2LJdGPj
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Copyright Disclaimers and Attribution:
**THE APPEARANCE OF NASA PHOTOS, VIDEO, OR AUDIO RECORDINGS DO NOT IMPLY OR CONSTITUTE NASA ENDORSEMENT. **
Copyright Disclaimer under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research.
Apollo 11 command module hatch, National Air and Space Museum, Washington, D.C.
(https://commons.wikimedia.org/wiki/File:Apollo_11_command_module_hatch.jpg)
by Mike Peel (http://www.mikepeel.net/), licensed under CC BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0/)
Famous speech from Neil Armstrong: At 2:56 UTC on , Armstrong made his descent to the Moon's surface and spoke his famous line "That's one small step for [a] man, one giant leap for mankind" exactly six and a half hours after landing.
(https://commons.wikimedia.org/wiki/File:Frase_de_Neil_Armstrong.ogg)
by NASA [Public Domain]
Sound of the Apollo 11 Landing on the Moon
(https://commons.wikimedia.org/wiki/File:Pouso_da_Apollo_11_na_Lua.ogg#filehistory)
by NASA [Public Domain]
Apollo 1 Prime Crew (https://commons.wikimedia.org/wiki/File:Apollo_1_Prime_Crew_-_GPN-2000-001159.jpg) by NASA [Public Domain]
Apollo 11 Launch HD SILENT
(https://images.nasa.gov/details-NHQ_07_16_1969_Apollo%2011%20Launch%20HD%20_No%20Audio%20.html) by NASA [Public Domain]
ID: NHQ_07_16_1969_Apollo 11 Launch HD _No Audio
Main Countdown Launch " We have a liftoff"
(https://www.nasa.gov/62282main_countdown_launch.wav)
by NASA [Public Domain]
Hatch, Crew, Apollo 11
(https://airandspace.si.edu/collection-objects/hatch-crew-apollo-11) by
Rockwell International Corporation
DATA SOURCE: National Air and Space Museum
Unified Hatch
(https://airandspace.si.edu/collection-objects/hatch-crew-apollo-11) by
Rockwell International Corporation
DATA SOURCE: National Air and Space Museum
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reach us / CNC Info:
Speeds & Feeds: https://provencut.com
Download Fusion 360: https://www.dpbolvw.net/click-9255839-12529306
Online Fusion 360 Training: http://bit.ly/LearnFusion360
Hands-On CNC Classes: https://www.nyccnc.com/events
SMW Products: https://saundersmachineworks.com/
CNC Resources: https://www.nyccnc.com 5 Reasons to Use a Fixture Plate on Your CNC Machine: https://bit.ly/3sNA4uH
Видео Machining Parts for the Apollo 11 Anniversary: Project Egress!! | WW258 канала NYC CNC
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Project Egress, With Adam SavageAdam Savage’s One Day Builds: Project Egress Apollo Hatch!Shapeoko Feeds & Speeds and Machining Tips!Project Egress: Casting a Handle for an Apollo Lander Hatch, with Adam Savage and the SmithsonianAdam Savage Project Egress Apollo 11 Hatch Live Build!CNC Machining - How to Design Parts for CNC MachiningHow to Make Incredible Aerospace Parts!Engineering Apollo 11: Making The Lunar Module [Full Documentary]90,000 HORSEPOWER Jet Engines Made With CNC Machined PartsEqualization Valve 1Home Shop Machinist Tour: Stefan Gotteswinter!Every Young CNC Machinist Needs To See THIS | Epic MFG DayReEntry game: Moon landing | Apollo powered descentTour of Scaled Composites - Aerospace Factory!CNC Machining Parts For Off-Road Race Trucks - TV EpisodeAMAZING Machine Shop Tour: Berkeley Lab with Tom Lipton!International Manufacturing Technology Show (I.M.T.S) 2018 | CNC Machine Tools & MORE!Making a Mini Lathe Carriage Lock out of a brass block to improve facing cuts1940s Vocational Guidance Film: The Machinist and Tool Maker - 1942 - CharlieDeanArchives