1985 Chevy Step Side SOLD in 23 Days

#SoCalStepper #SoCalStepSide 1985 Chevrolet Rat Truck C10 Silverado
Custom built piece by piece with highest quality parts & materials.
Small Block Chevy 350 with 9.7 to 1 compression Takes 87 octane in winter, Recommend 91 octane in summer.
Holley Commander intake manifold RPM range 1800 to a Holley 750 double pumper with manual choke
Lumpy Cam Works wonderful on the street and performs extremely well, Camcard will be included with paperwork.
Edelbrock e-street aluminum heads flat top pistons producing 9.7 to 1 compression.
700 R4 trans built by Hesperia trans and all cables from bowtie transmission in Hesperia California.
Rear end 10 bolt posi 4:11 gear.
Wheels are custom one-off Vossen's 22 front & 24s rear they were custom made for this truck 10 inch wide front 12 wide in rear.
Front disc stock and rear drum Wilwood master cylinder no booster stops easy on a dime no vacuum problems with Cam or the functioning of the engine when the brakes are applied.
Heavy duty receiver hitch and plug for Towing. This is a fully function shop truck & not just a looker.
Bags in rear only with stock leaf springs so you can still use truck for towing and Toes very well also bags allow 4 raising and lowering for desired look.
Also takes a standard rear shock.
Chassis mods 3 inch drop spindles also a custom 2in dropped lower control arm note all components are Above the Rim so no problems if Tire ever goes flat.
Truck has wonderful travel drives like a standard height truck.
Rear sinoc all quarter inch plate and all suspension work done by Custom Corvette ReStore in Las Vegas proprietor passed away during build after suspension was finished.
Interior mid row seat out of a mid 2000 Suburban Tweed panels midnight charcoal carpet custom covered Dash all gauges in cluster are stock except for oil and water temp those are manual gauges.
Electric locks and electric windows work flawlessly.
AM FM cassette works great wiring all new painless system installed professionally.
Bed and box, new wood with stock sandblasted and coated rails with stainless steel Hardware note wood and some Hardware made to look old all under bed support blasted and coated
Complete stainless steel exhaust headers to tailpipe, 2 into 1 exhaust system for a ferocious sound and functions extremely well
We have used a large Flowmaster to 2 into 1 inlets and 1 3 and 1/2 inch Outlet
Firewall upgrades firewall has been smooth, deliberate lacquer checking for old school look
Inner Fender Wells, tubular frame work with Zeus tab aluminum panels 3 per side
Two fold function remove aluminum panels easy access for suspension and engine maintenance
Cooling system aluminum radiator electric fans custom aluminum overflow, custom aluminum upper and lower tubing to replace radiator hoses as seen in pics, also Auto fan and an under dash fan override switch. Two functioning fuel tanks.
Basically a frame-off Resto was preformed in this truck. It’s a one of a kind rip down the highway rig that can show or show off. This build entire truck has 5,000 miles on it or less.
You won’t be disappointed & you couldn’t build it for under $40K. Currently registered & titled in Arizona. Located in Southern California. Call 951.348.5794 to get your ride SOLD in 10 days or less

Видео 1985 Chevy Step Side SOLD in 23 Days канала California Classic Car