Citizen Watch Setting Instruction — E650

Setting instructions for the Citizen E650.

Main Sections
Setting the Time and Calendar 00:00
The Alternate Time Zone 04:05
Setting the Alarm 06:09
All Reset 08:15
Zero Positioning 09:05

Sections With Timing

Setting the Time and Calendar 00:00
Pull Crown Out One Click -- Activate Mode Changing 00:04
Rotate Crown -- Change to One of Radio Controlled Time Zones 00:09
Pull Crown Out Additional Click -- Time Setting Mode 00:28
Press/Release Upper Button -- DST ON/Off 00:41
Press/Release Lower Button -- Activate Time Setting 00:54
Rotate Crown -- Set Time -Pay Attention to 24-Hour Hand 01:05
Press/Release Lower Button -- Activate Date Setting 01:21
Rotate Crown -- Set Date of Month 01:33
Press/Release Lower Button - Activate Leap Year Setting 01:55
Understand Leap Year Setting 02:06
Set Leap Year -- Example Month to May, Leap Year 3 years past 03:01
Press/Release Lower button -- Activate Day of Week Setting 03:33
Rotate Crown -- Set Day of Week 03:49
Push Crown in Two Clicks -- Finalize Setting 03:58

The Alternate Time Zone 04:05
About the Alternate Zone 04:09
Pull Crown Out One Click - Mode Change Position 04:36
Rotate Crown -- Change to A-TM Mode 04:44
Pull Crown Out Additional Click -- Activate Alternate Time Setting 05:06
Press/Release Upper Right Button -- Set DST ON/Off 05:20
If Zone is in 15 or 30 Min Increments, Press/Release Lower Button 05:33
If Zone is in 1-hour increments, Rotate Crown 05:50
Push Crown in One Click -- Finalize Setting 06:02

Setting the Alarm 06:09
About the Alarm -- 24-hour Alarm 06:12
Pull Crown Out One Click - Mode Change Position 06:37
Rotate Crown -- Change to ALM Mode 06:44
Pull Crown Out Additional Click -- Activate Alarm Time Setting 07:05
Press/Release Upper Button -- Turn Alarm On/Off 07:10
Rotate Crown -- Set Alarm Time -- Pay Attention to 24-hour hand 07:21
Push Crown in One Click -- Mode Change Position 07:37
Rotate Crown -- Choose Time Zone 07:43
Push Crown in One Click -- Finalize Setting - Alarm Sample 07:55
Push Either Button -- Stop Alarm tone 08:09

All Reset 08:15
Pull Crown Out One Click - Mode Change Position 08:19
Rotate Crown -- Change to CHR Mode 08:25
Pull Crown out Additional Click -- Hands Move to Stored Zero Pos. 08:36
Press/Hold Both Buttons 2 Seconds/Release -- Tone and Hands move 08:49
You must now set the Zero Positions 09:01

Zero Positioning 09:05
Immediately following all reset Press/Release Lower Right Button 09:08
Rotate Crown - Set minute, hour and 24-hour Hands to 12:00 09:21
Press/Release Lower Button -- Activate Second Hand 09:32
Rotate Crown -- Set Second Hand to 12:00 09:43
Press/Release Lower Button -- Activate Date and 1:00 Sub Hand 09:53
Rotate Crown -- Set 1:00 hand to 30/Date between 31/1 10:07
Correct Zero Positions 10:19
Push Crown in Two Clicks -- Finalize Setting 10:41
Your Must Now Set Time and Date 10:48

Видео Citizen Watch Setting Instruction — E650 канала Citizen Watch US