Загрузка страницы

Paintless Dent Removal (PDR) Using the Harbor Freight Crossbar Dent Repair Kit

🛒 Product link(s) at bottom of video description.

⚠️ Note: There have been a few comments about getting this professionally done. Unless you've practiced this on some sheet metal or a beat up car and have gotten good at it, I agree that you should seek a professional to do the repair work to prevent any further damage such as stretching the metal by pulling it out too far.

How I removed most of large dent left behind from someone hitting my car with their truck door. This method essentially uses a crossbar tool and hot glue gun to pull a dent up. It is a time consuming process, but it only costs around $15 to do. It works well on simple dents, but it may not completely fix deep dents or ones where the metal is creased such as in my case. There are before and after pictures at the end of the video.

🛒 Crossbar Dent Repair Kit: https://www.harborfreight.com/crossbar-dent-repair-kit-66957.html

☕ If you find this helpful, you can buy me a coffee at https://ko-fi.com/vampyrex13.

Видео Paintless Dent Removal (PDR) Using the Harbor Freight Crossbar Dent Repair Kit канала Derrick Aquino
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
13 мая 2018 г. 3:42:52
00:05:54
Яндекс.Метрика