Final Part of the Laser Cutter Build (Finally Done)
In this video I take you through the last leg of my laser cutter build. I'm sure there will be more to come from it.
If you haven't seen them you can watch the other parts below
Part 1: https://www.youtube.com/watch?v=DvFBhxP-5sw
Part 2: https://www.youtube.com/watch?v=pooF_2aUGKs
Part 3: https://www.youtube.com/watch?v=NULZSxGtrH0
Видео Final Part of the Laser Cutter Build (Finally Done) канала Puddin
If you haven't seen them you can watch the other parts below
Part 1: https://www.youtube.com/watch?v=DvFBhxP-5sw
Part 2: https://www.youtube.com/watch?v=pooF_2aUGKs
Part 3: https://www.youtube.com/watch?v=NULZSxGtrH0
Видео Final Part of the Laser Cutter Build (Finally Done) канала Puddin
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Huge 3D printer build Part 1
Under the Scope: Cobalt Chloride pulling moisture from the atmosphere
Under the Scope: Soybean Stem (Brightfield vs Darkfield)
Solar Eclipse August 21st, 2017
Under the Scope: Idaho Potato
Huge 3D printer build Part 3
Patching Broken Cement In My Kiln
Can Shrink Film be Cut With a Laser Cutter
Scoop and Seal Terrariums
Update to Laser Cutter Build Part 2
Under the Scope: Baker's Yeast
Cryengine 3 Particle Test 1
Breaking the World Record for Steel Empire (Sega Genesis)
Building a DIY Spectrometer Part 2 - Both Success and Failure
Under the Scope: Human Skin
Making a New Furnace for Casting
Building a DIY Spectrometer Part 1
Upgrading my CNC 6040
Under the Scope: Common Housefly
Cutting Open a Keokuk Geode - Short
Lets Cut Open Keokuk Geodes