DIY E-bike Battery || Assembling 48V Hailong E-bike Battery || E-bike Conversion #1

Hello, fellow makers!
In this tutorial i will show you how i assembled my Hailong 48V battery kit.

For more insights and details check out this Instructable : https://www.instructables.com/id/DIY-E-bike-Battery-Assembling-48V-Hailong-Battery/

Support me on Ko-fi: https://ko-fi.com/hypermakes2620

Things required:
Hailong 48V Battery case :https://aliexpress.com/item/32891133082.html
18650 Li-ion cells EV grade 3C discharge rate : Local supplier
54.6V 4A Charger : https://aliexpress.com/item/32742009327.html
Spot Welder : https://aliexpress.com/item/1005001860515660.html
BMS(13S 60A) : https://aliexpress.com/item/4000875181450.html
Silicone Wires : https://aliexpress.com/item/1005002701853634.html
Insulation Gasket : https://aliexpress.com/item/1005001694802332.html

Tools required:
Soldering Iron
Solder wire
Solder flux
Hot glue gun
Wire stripper
Kapton Tape
Note*- Step numbering is wrong in video. Use time stamps if you are lost.

Steps
0:00 Intro
0:16 Materials Required
0:55 Checking Cells
1:56 Arranging Cells
3:28 Arranging Nickel Sheets
3:51 Spot Welding Cells
4:44 Adding BMS
5:43 Masking Battery
6:42 Checking the fit of new BMS
7:47 Wiring All Components
9:05 Putting the battery together

Follow me on Instagram: https://instagram.com/hyper_makes

Видео DIY E-bike Battery || Assembling 48V Hailong E-bike Battery || E-bike Conversion #1 канала Hyper Makes