3d Printing Two Color Signs Text in FreeCAD
Learn how to add 3d text to your models with FreeCAD. In this video, you will learn how to use ShapeStrings in FreeCAD and how to use Bounding Boxes to position components of your model. This technique is perfect for designing models with 3d text you will print on any 3d printer, including printers from Prusa, Creality, Monoprice, Anet, Flashforge, and JG Maker that I have reviewed on this channel. In the video, I demonstrate how to use IdeaMaker to split apart models and print them in 2 colors.
The following playlist includes additional videos about multiple color 3d printing:
https://www.youtube.com/playlist?list=PLxa9m2nC6N92L4QllsZ9StWwKopo-CpsR
The following playlist is a good place to learn FreeCAD:
https://www.youtube.com/playlist?list=PLxa9m2nC6N924jFUOYRECQUMm9xl4_jUI
Content in this Video
00:00 Introduction
03:10 Using Text in FreeCAD
4:20 FreeCAD Part Design Workbench
8:56 FreeCAD Draft Workbench
11:13 Locating Font Files
13:37 Using ShapeStrings
16:03 Understanding FreeCAD Bounding Boxes
17:43 Using Bounding Boxes in Formulas
19:06 Extruding / Padding a ShapeString
20:10 3d Printing a FreeCAD 2 Color Model
21:25 Splitting Colors in IdeaMaker
Let's continue to learn together. Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and website.
I have reviewed the following printers or similar printers:
➡︎ https://kit.co/makewithtech/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ https://kit.co/makewithtech/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ https://kit.co/makewithtech/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ https://kit.co/makewithtech/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
➡︎ https://kit.co/makewithtech/software-and-electronic-kits
Some of the Woodworking products I use:
➡︎ https://kit.co/makewithtech/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (https://makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third-party images. Images and videos used in product reviews and tutorials are from the original product (software or hardware) manufacturer's site.
** We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
---
The MakeWithTech channel teaches people how to use desktop technology to create, innovate and make things. If you are a "maker" and want to learn more about 3d Printing, 3d Printers, 3d Printing Slicers, Computer-Aided Design (CAD), or 3d Modeling, this is a place you should visit often. The channel includes additional content about using a wood lathe, woodworking, programming single-board computers such as the Raspberry Pi and Python. Available reviews are about Prusa, Creality, Monoprice, ANET, JG Maker, and Flashforge 3d Printers. Slicers covered include MatterControl, Cura, PrusaSlicer, Flashprint, and IdeaMaker.
Видео 3d Printing Two Color Signs Text in FreeCAD канала Make With Tech (MakeWithTech)
The following playlist includes additional videos about multiple color 3d printing:
https://www.youtube.com/playlist?list=PLxa9m2nC6N92L4QllsZ9StWwKopo-CpsR
The following playlist is a good place to learn FreeCAD:
https://www.youtube.com/playlist?list=PLxa9m2nC6N924jFUOYRECQUMm9xl4_jUI
Content in this Video
00:00 Introduction
03:10 Using Text in FreeCAD
4:20 FreeCAD Part Design Workbench
8:56 FreeCAD Draft Workbench
11:13 Locating Font Files
13:37 Using ShapeStrings
16:03 Understanding FreeCAD Bounding Boxes
17:43 Using Bounding Boxes in Formulas
19:06 Extruding / Padding a ShapeString
20:10 3d Printing a FreeCAD 2 Color Model
21:25 Splitting Colors in IdeaMaker
Let's continue to learn together. Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and website.
I have reviewed the following printers or similar printers:
➡︎ https://kit.co/makewithtech/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ https://kit.co/makewithtech/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ https://kit.co/makewithtech/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ https://kit.co/makewithtech/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
➡︎ https://kit.co/makewithtech/software-and-electronic-kits
Some of the Woodworking products I use:
➡︎ https://kit.co/makewithtech/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (https://makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third-party images. Images and videos used in product reviews and tutorials are from the original product (software or hardware) manufacturer's site.
** We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
---
The MakeWithTech channel teaches people how to use desktop technology to create, innovate and make things. If you are a "maker" and want to learn more about 3d Printing, 3d Printers, 3d Printing Slicers, Computer-Aided Design (CAD), or 3d Modeling, this is a place you should visit often. The channel includes additional content about using a wood lathe, woodworking, programming single-board computers such as the Raspberry Pi and Python. Available reviews are about Prusa, Creality, Monoprice, ANET, JG Maker, and Flashforge 3d Printers. Slicers covered include MatterControl, Cura, PrusaSlicer, Flashprint, and IdeaMaker.
Видео 3d Printing Two Color Signs Text in FreeCAD канала Make With Tech (MakeWithTech)
Показать
Комментарии отсутствуют
Информация о видео
23 июня 2021 г. 0:16:42
00:25:02
Другие видео канала
![Freecad tips and tricks (#4.1): Mapping text to a curve surface](https://i.ytimg.com/vi/yV26cig0p4I/default.jpg)
![Skip the HW Store 3d Print it Instead](https://i.ytimg.com/vi/jJtVXDTjS28/default.jpg)
![FreeCAD: I Want To Move It, Move It... but I can't ? Yes you can!](https://i.ytimg.com/vi/tPl5VgbCk6o/default.jpg)
![3d Printing Two Top Slicers Compared](https://i.ytimg.com/vi/Pl0z2w6N7Ro/default.jpg)
![](https://i.ytimg.com/vi/YT0pKizRD58/default.jpg)
![](https://i.ytimg.com/vi/YSW-8YoSxCA/default.jpg)
![FreeCAD Multiple Sketches, Datum Planes, Pockets & Holes](https://i.ytimg.com/vi/4uEwHB7LciA/default.jpg)
![Two Color Print Using Z-Offset Plugin in Cura](https://i.ytimg.com/vi/h_Mohd7JLzw/default.jpg)
![Using FreeCAD for engraving text (shape strings) and pictures](https://i.ytimg.com/vi/juzDSwGya1E/default.jpg)
![Putting Curved Text on a Ring in TinkerCAD](https://i.ytimg.com/vi/VqrjZ6Lvo4c/default.jpg)
![FreeCAD Is Fundamentally Broken! - Now what... Help Me Decide...](https://i.ytimg.com/vi/QSsVFu929jo/default.jpg)
![FreeCAD for Beginners | Design a Vase with Revolve and Loft](https://i.ytimg.com/vi/KXFa4bt4w2I/default.jpg)
![Your First FreeCAD Project For 3D Printing | The Realthunder Branch | Direct Modeling | P. 4](https://i.ytimg.com/vi/AntQAnDFKC8/default.jpg)
![Picking 3d CAD Software to use with 3d Printing](https://i.ytimg.com/vi/yiWvDw7e0GM/default.jpg)
![FreeCAD for Beginners pt.3 - Importing and Editing .STL Files](https://i.ytimg.com/vi/dr1qtaURrvI/default.jpg)
![Mechanical Engineering with Blender and FreeCad Tutorial](https://i.ytimg.com/vi/AD_jyBN09jA/default.jpg)
![FreeCAD for Beginners #3 Offset Sketches and Datum Planes](https://i.ytimg.com/vi/5iMSQ87Jcis/default.jpg)
![Designing for 3d Printing with SVG Files](https://i.ytimg.com/vi/B-kWtReUEN8/default.jpg)
![From Start to first 3D print in 5 Minutes with FreeCAD 0.19 (English)](https://i.ytimg.com/vi/d_o6IzcLHvk/default.jpg)
![10 Top 3d Printing Tools and Supplies](https://i.ytimg.com/vi/_gu7CoJybwM/default.jpg)