10W Explosion Proof LED Exit Sign - C1D2 - Low Voltage/Red - NYC Building Code Approved - IP54

10W Explosion Proof LED Exit Sign - C1D2 - Low Voltage/Red - NYC Building Code Approved - IP54

https://www.larsonelectronics.com/product/273490/10w-explosion-proof-led-exit-sign-c1d2-low-voltage-red-nyc-building-code-approved-ip54?productIdBase64=MjczNDkw0&rank=1

The Larson Electronics HAL-EXT-LE11 is an Explosion Proof Exit Sign for Class I, Division 2 rated work sites and environments. This IP54-rated unit features an edge-lit, acrylic panel and a built-in red LED lamp. Operators can secure the exit sign via end, ceiling and back mounting configurations. Equipped with red lettering on the sign, the system is NYC building code approved.

The HAL-EXT-LE11 is designed to improve safety inside Class I, Division 2 work sites by marking exit ways. This 10-watt unit operates on low voltage and features and edge-lit panel. Constructed of acrylic, the clear sign is illuminated using a built-in LED fixture. This component emits up to 442 lumens of red light over the sign to ensure detection. Operators can choose between single-face or double-face panel configurations. The system has red lettering on the sign and is NYC building code approved.

The HAL-EXT-LE11 is approved for Class I, Division 2 Groups A,B,C and D locations. This unit carries an IP54 waterproof rating ensuring protection against limited ingress from dust, dirt, oils and full protection against water sprayed at high pressure directly on the explosion proof exit sign. The unit is ideal for applications and industrial operations with a hazardous location classification, where dusty or wet conditions are commonly encountered.

LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.

Wiring/Power: The explosion proof exit sign is equipped with five feet of cord, containing a standard two wire (White+ Black-) connecting configuration. These lights are not multi-voltage; each light is preconfigured for 12 or 24 volt DC current.

Mounting: The HAL-EXT-LE11 is compatible with end, top and back mounting requirements. End mounting secures the explosion proof exit sign from the side of the end plate, via the junction box. The top mount option secures the sign directly on the ceiling, via the upper section of the canopy. Back mounting secures the sign on horizontal surfaces and walls. All mounting components (screws, hex nuts) are provided with the sign.

Applications: Exit ways, hallways, hazardous locations, flammable work sites, oil and gas, confined spaces, processing plants, warehouses and more.

At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 1-800-240-2508 or message sales@larsonelectronics.com for more information about our custom options tailored to meet your specific industry needs.

Видео 10W Explosion Proof LED Exit Sign - C1D2 - Low Voltage/Red - NYC Building Code Approved - IP54 канала Larson Electronics Product Testing