Harley 1584 cc - How to replace Mainshaft Seal (Inner Primary)

Please SUBSCRIBE if you like this video!
If this video helps at all PLEASE ..."SUBSCRIBE"...Thank you!
SEE BELOW FOR TOOL LIST AND TORQUE SPECS.
Primary case oil leak? If drain plug and Primary cover gasket didn't fix your leak it's probably your "main shaft seal" that is leaking or possibly the seal on transmission side behind primary. In this video I cover how to find out for sure which one it is and how to replace the Main Shaft Seal. FYI also referred to as Mainshaft Seal , Inner Primary Seal and Inner Primary Bearing Oil Seal
TOOLS REQUIRED: (in the order you'll need them)...
-Phillips Head Screwdriver
-7/16" Wrench
-T-40 Torx socket
-1/4" Hex socket
-1/2" wrench
5/16" Hex socket
-T-27 Torx socket
-3/16" Hex socket
-7/32" Hex socket
-11/16" Wrench
-1/2" socket
-30mm socket
-3" extension
-Breaker Bar
-Snap Ring Pliers
-13/16" socket
-Sprocket lock tool (8" prybar, piece of wood etc)
-3/8" wrench
-Seal Removal tool (prybar will work)
-Shop Press recommended for pressing in new seal and/or bearing

TORQUE SPECS: (in order of assembly)
-Primary Case Housing Bolts (5)- 25-27 ft-lbs
-Compensating Sprocket Bolt- 100 ft-lbs initial Then 140 ft-lbs Final
-Main Shaft Nut- (apply 2 drops RED Loctite) 70-80 ft-lbs
-Chain Tensioner Bolts- 15-19 ft-lbs
-Primary Case Cover Screws- 108-120 In-lbs
-Derby Cover Screws- 84-108 in-lbs
-Primary Chaincase Drain Plug- 14-21 ft-lbs
-Starter Mount Bolts- 25-27 ft-lbs
-Rear Fender Screw- 12-18 ft-lbs
#HarleyMainShaftSeal #DynaMainShaftSeal

Видео Harley 1584 cc - How to replace Mainshaft Seal (Inner Primary) канала Redneck Tech