How to Start Forced Regen on Freightliner Detroit Diesel DD15 | OTR Performance
How to start a regen on a Freightliner Cascadia DD15, This works on EPA07, EPA10, GHG14 emission models.
Here is the link: https://otrperformance.com/products/otr-reset-tool-detroit-diesel
The OTR Reset Tool provides you the capability to reset the fault codes, reset the aftertreatment system, and perform a forced regen.
Clear Active / Inactive Codes at the Dealer Level
Clear Aftertreatment Derates and Problems
Clear Learned Data Values
Regen Option
Start Forced Regeneration
Simple to do, wait an extra minute
Be in control of your regen system.
This tool sends specific commands based on OTR's algorithm to be able to perform these things at the dealer level. Simple to use, and no special software or hardware needed. No need to visit the dealer or shop either!
AFT FEATURES:
Reset Ash Accumulators
Reset SCR Accumulators
Resets DPF Zone 5 (Shut down) Message
Reset Parked Regen Needed
Reset Level 2, 3 and 4 regen levels
Reset DPF / SCR Learned Data
Reset DPF / SCR Timers for regen
DTC FEATURES:
Reset Active / Inactive Faults
OEM level commands, don't need to have Detroit DDDL
Complete simple to use the tool without needing anything additional
Reset ALL Modules located on J1708 / J1939 Systems
Works on Freightliner, Western Star, and other models with DD engines.
This OTR Reset Tool is a plug & play tool that will reset your fault codes and aftertreatment (DPF / SCR) system. This product is used solely for the purpose of clearing “Active or Inactive” fault codes in the ECUs of the vehicle.
Specific trucks will display fault codes on the dashboard, and most of the time you will have a check engine light or a check module message. After this, a screen will appear stating that the error has occurred. Many of the codes that do appear on your dashboard fall into the category of “Ghost Code.” The phrase “Ghost Code” comes from the fact that the fault code activated was triggered by certain conditions that are near impossible to recreate.
Active fault codes do cause excessive downtime as you try to find a repair shop and after you finally find and arrive at a repair shop you are waiting possibly hours only to learn that in fact, you can make it to your next destination safely and with no problems – that the fault codes are not severe. Fault codes can mislead not only the owner and driver but also the technician into thinking there is a severe problem with the truck when there is not.
This will give you the relief you need knowing that you can make it to your destination safely while decreasing downtime. All you have to do is plug the DTC + AFT Reset Tool into the diagnostic connection and clear the fault code once. If the fault code does come back a second time, you do need to take the matter seriously. This product is used solely for the purpose of clearing active and/or inactive fault codes. Nowadays semi-trucks are plagued with fault codes, let OTR’s OTR Reset Tool be your solution to a seemingly never-ending problem.
OTR’s tool will also reset the aftertreatment system after maintenance work has been completed. Moreover, you can replace engine related sensors over the road and just plug in the OTR Reset Tool to clear and reset the system. The device will then send the proper communication data over to the specific network to perform these extensive resets.
START FORCED REGEN
This feature allows you to be in total control of your regeneration system. This feature allows you to start a forced regen when the truck is not asking for one to burn off the soot that is in the DPF filter assembly.
Why do you need to do a forced regen?
Soot level to high for a passive regen to occur
Soot level in critical mode
Fault codes relating to Nox Evaluation that require forced regen
Common practice to ensure DPF system is working properly
____________________________________
OTR Performance is the destination for videos of how to's, diagnostics, and featured videos. Reaching the Diesel engine industry, OTR Performance offers a product lineup for every day Diesel engine owners.
OUR CONTACT
Email or call us with any questions: sales@otrperformance.com or 586-799-4375
__________________________________
OUR SOCIAL:
Youtube - https://www.youtube.com/user/OTRperformance
Facebook - https://www.facebook.com/OTRperformance
Instagram - https://www.instagram.com/OTRperformance
Twitter - https://www.twitter.com/OTRperformance
____________________________________
Let us know if there is a video you would like us to make. We love taking feedback!
Thank you for checking out our videos. Stay tuned for more.
________________________________
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use thereof does not imply any affiliation or endorsement.
OTR Performance, OTRPerformance
Видео How to Start Forced Regen on Freightliner Detroit Diesel DD15 | OTR Performance канала OTR Performance
Here is the link: https://otrperformance.com/products/otr-reset-tool-detroit-diesel
The OTR Reset Tool provides you the capability to reset the fault codes, reset the aftertreatment system, and perform a forced regen.
Clear Active / Inactive Codes at the Dealer Level
Clear Aftertreatment Derates and Problems
Clear Learned Data Values
Regen Option
Start Forced Regeneration
Simple to do, wait an extra minute
Be in control of your regen system.
This tool sends specific commands based on OTR's algorithm to be able to perform these things at the dealer level. Simple to use, and no special software or hardware needed. No need to visit the dealer or shop either!
AFT FEATURES:
Reset Ash Accumulators
Reset SCR Accumulators
Resets DPF Zone 5 (Shut down) Message
Reset Parked Regen Needed
Reset Level 2, 3 and 4 regen levels
Reset DPF / SCR Learned Data
Reset DPF / SCR Timers for regen
DTC FEATURES:
Reset Active / Inactive Faults
OEM level commands, don't need to have Detroit DDDL
Complete simple to use the tool without needing anything additional
Reset ALL Modules located on J1708 / J1939 Systems
Works on Freightliner, Western Star, and other models with DD engines.
This OTR Reset Tool is a plug & play tool that will reset your fault codes and aftertreatment (DPF / SCR) system. This product is used solely for the purpose of clearing “Active or Inactive” fault codes in the ECUs of the vehicle.
Specific trucks will display fault codes on the dashboard, and most of the time you will have a check engine light or a check module message. After this, a screen will appear stating that the error has occurred. Many of the codes that do appear on your dashboard fall into the category of “Ghost Code.” The phrase “Ghost Code” comes from the fact that the fault code activated was triggered by certain conditions that are near impossible to recreate.
Active fault codes do cause excessive downtime as you try to find a repair shop and after you finally find and arrive at a repair shop you are waiting possibly hours only to learn that in fact, you can make it to your next destination safely and with no problems – that the fault codes are not severe. Fault codes can mislead not only the owner and driver but also the technician into thinking there is a severe problem with the truck when there is not.
This will give you the relief you need knowing that you can make it to your destination safely while decreasing downtime. All you have to do is plug the DTC + AFT Reset Tool into the diagnostic connection and clear the fault code once. If the fault code does come back a second time, you do need to take the matter seriously. This product is used solely for the purpose of clearing active and/or inactive fault codes. Nowadays semi-trucks are plagued with fault codes, let OTR’s OTR Reset Tool be your solution to a seemingly never-ending problem.
OTR’s tool will also reset the aftertreatment system after maintenance work has been completed. Moreover, you can replace engine related sensors over the road and just plug in the OTR Reset Tool to clear and reset the system. The device will then send the proper communication data over to the specific network to perform these extensive resets.
START FORCED REGEN
This feature allows you to be in total control of your regeneration system. This feature allows you to start a forced regen when the truck is not asking for one to burn off the soot that is in the DPF filter assembly.
Why do you need to do a forced regen?
Soot level to high for a passive regen to occur
Soot level in critical mode
Fault codes relating to Nox Evaluation that require forced regen
Common practice to ensure DPF system is working properly
____________________________________
OTR Performance is the destination for videos of how to's, diagnostics, and featured videos. Reaching the Diesel engine industry, OTR Performance offers a product lineup for every day Diesel engine owners.
OUR CONTACT
Email or call us with any questions: sales@otrperformance.com or 586-799-4375
__________________________________
OUR SOCIAL:
Youtube - https://www.youtube.com/user/OTRperformance
Facebook - https://www.facebook.com/OTRperformance
Instagram - https://www.instagram.com/OTRperformance
Twitter - https://www.twitter.com/OTRperformance
____________________________________
Let us know if there is a video you would like us to make. We love taking feedback!
Thank you for checking out our videos. Stay tuned for more.
________________________________
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use thereof does not imply any affiliation or endorsement.
OTR Performance, OTRPerformance
Видео How to Start Forced Regen on Freightliner Detroit Diesel DD15 | OTR Performance канала OTR Performance
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to Regen for Freightliner and Volvo trucks](https://i.ytimg.com/vi/cXXZ8DmO9-w/default.jpg)
![Freightliner cascadia DD13 DD15 DD16 Emissions derate bypass 5 miles per hour SCR DEF light blinking](https://i.ytimg.com/vi/JP5UTpWI6a0/default.jpg)
![OTR Reset Tool | Overview](https://i.ytimg.com/vi/-DtwzJBUS54/default.jpg)
![NexLink NL102P Review - Must have tool to force DPF regen & code reset for owner operators](https://i.ytimg.com/vi/n89--X-37d4/default.jpg)
![DD15 Regeneration Problem Sot Level Fuel Doser cleaning.](https://i.ytimg.com/vi/1TOkomb29r4/default.jpg)
![How to Manual Regen 2015 Freightliner](https://i.ytimg.com/vi/qnxXaEh2wfk/default.jpg)
![How To: Regen on Freightliner Cascadia](https://i.ytimg.com/vi/xAybDRr6a18/default.jpg)
![DD15 with regen issues. Soot level high, parked regen failed due to not reaching temp. LOW](https://i.ytimg.com/vi/Ve7VLfFMWv4/default.jpg)
![EATS STATUS: says can’t do a regen, do this instead](https://i.ytimg.com/vi/4MlHyGjQ8fU/default.jpg)
![How To Perform a Reset](https://i.ytimg.com/vi/TQ-20oI05fs/default.jpg)
![Regen Freightliner Truck :How To](https://i.ytimg.com/vi/BnUXJuHbypc/default.jpg)
![2014 Freightliner Cascadia 125](https://i.ytimg.com/vi/o_89p9cyMz0/default.jpg)
![Parked Regen Light Flashing?](https://i.ytimg.com/vi/CIGciLiHDGM/default.jpg)
![Regen A freightliner?DEF PROBLEM Yellow flashing light & check engine light? Derated, speed dropped](https://i.ytimg.com/vi/0Bvxcp-_RhA/default.jpg)
![How to regen your Freightliner truck](https://i.ytimg.com/vi/Ei-GgBBPmQQ/default.jpg)
![How to Reset Codes on a Semi Truck WITHOUT a Computer!](https://i.ytimg.com/vi/W0jHNsZR5Po/default.jpg)
![Parked Regen GHG17 - Steps to Complete Regen Training Video](https://i.ytimg.com/vi/yeW9l_pLFuE/default.jpg)
![How To Perform Park Regen in Freightliner Cascadia Evolution](https://i.ytimg.com/vi/vVXjMp7cPcE/default.jpg)
![How to Do A Regen💨Freightliner](https://i.ytimg.com/vi/cBLQHUqOcyc/default.jpg)
![HOW TO BYPASS DEF YOURSELF? EASIEST TRICK TO SAVE ROAD SERVICE IF TRUCK SPEED DROP TO 5 MPH.](https://i.ytimg.com/vi/L6vuNajht3c/default.jpg)