Flex Innovations F-100D Super Sabre

The second flight of the day. Landed with a tailwind. The maiden was not recorded, but it landed much slower with a headwind.
There is minimal information about this jet on the internet. So here are some building tips if you want to pick up this jet.
I did not bother with the Aura8(seen a couple failures with the Aura8 onboard). Put a Spektrum AR637T in it. Had to reverse some servos manually when you put them on a Y lead.
Also replaced the EDF unit with the E-flite 90mm Viper EDF unit with inrunner motor. Drop-in fit.
Avian 130A Smart ESC Version A(with a longer battery lead. Also from the 90mm Viper). I programmed reverse thrust. However, I did not demonstrate it in this video. Coz the thin plastic tail exhaust tube inside the tail nozzle needs to be glued down. Otherwise, it will get deformed due to suction.

Receiver: AR637T
ESC: Avian 130A Smart ESC Version.A
Robart 3" scale wheels.
Dave Brown 1.75" foam nose wheels(Sanded down to about 1.6")
Assan AG61 Steering gyro.

I might post a thread about the detail build of this jet on The RCgroup if anyone is interested to pick one up. Drop a comment down below.

Видео Flex Innovations F-100D Super Sabre канала Enzo K